VIEW FULL VERSION: Link
Subject: Re: ATV Tire Sizes
Content: Very good pull.....Im gonna Sticky this thread for Reference and Expand upon it:yes: 10 x 8 3+5 4/110 Wheel Diameter = 10" Wheel Width = 8" Wheel Offset = 3" mounting centerline to inside wheel edge and 5" mounting center line to the outside wheel edge Number of Bolt Holes = 4 Spacing of Bolt Holes = 110" (measured from center of one bolt hole across center of wheel to opposite bolt hole) Note: Most OEM Wheel Applications have no offset (the wheel is centered over the hub). In these cases, the wheel offset is omitted from the listing. Most of the bolt applications are in millimeters. You can determine your bolt pattern by measuring from the center of one wheel stud to the center of the opposing wheel stud across the hub. Next, determine your correct bolt pattern. Convert your measurement from inches to millimeters by multiplying by 25.4. It's that simple. Example: Wheel stud measurement: 4-5/16" = (4.313") Formula: 4.313 x 25.4 = 109.6 mm ==> 110mm bolt pattern