Quantcast
Jump to content

I'm going crazy!!


Recommended Posts

when i had my 2fiddy, we took it in to get its axle replaced, since i snapped it. i also had to have bearings, hubs, and seals as well.

well we took it in on a monday. they guaranteed me that it would be out by thursday. thursday rolled around and they didnt even look at it yet. so my dad said "either look at it now and have it done by saturday or im takin my business else where."

so they had it done by saturday. so i went out ridin that sunday. after about 2 hours of ridin, i looked at my new axle and i found my seals had came loose. thats not good because if we had gotten grit and mud in the drive shaft lube the whole rear end would lock up. welllllllll it turns out they only replace hubs, and axle. and nothing else. and they even charged us for the

1) AXLE

2)HUBS

3)BEARINGS

4)SEALS

soo we went took it back in that monday. and my dad said "if they is anything harmed on this quad, then you can bet your sweet as* that we'll sue the hell outta you"

so by the grace of God, it turns out there was nothing wrong. they replaced the seals and bearings free(which shouldve been done in the first place!!) and i had it out by that friday.

SOOOOOOOOO it took them almost 2 weeks. needless to say we are never doing business with them again

Link to comment
Share on other sites

Just tell them how unsatisfied you are and their error screwed up your plans. If it's not ready by (a day pick out by you) you are taking your business else where. Let them know that you know tons of people who ride and you are going to tell everyone you know not to use them. Just make threats that will hurt their reputation.

Link to comment
Share on other sites

for real, that stinks and I'm so sorry...

I'm sure there are people in your position that are super mad at my mechanic cause he's backed up...buttt if you've read any of my racing threads then you know i've blown it up back to back the past two weekends nad he's dropped everythign to work on it and get me back on the track...

I guess that's the good and bad about mechanics....my advice would be to find a trust worthy mechanic that you really like....be respectful and get to know him, we've done business with our mechanic since 2004....it helps building that kind of relationship, especially when you get in a bind like I'm currently in wiht mine.....and also, when you have a good relationship like that and end up dropping 1500 bucks at their shop in 2 weeks...they let you pay over the course of like a month or two, which really helps...

I hope you can find someone like this!!! I've learned that all ATV/Bike mechanics are super busy and over worked. They'll treat you really well if you respect that about them...but I do agree that they shouldn't lie about things being done by a certain date/time and them not even starting the work....that's definitely a good way to lose business....

Link to comment
Share on other sites

For me, I took my quad to Cal Coast Motorsports. For "Break-in Maintenance".....a 3 hour job.

I took it in on saturday, mind you, these guys are open 7 days a week and a minimum of 6 hours a day....It wasn't touched till Monday, and I didn't get it back till Mid Tuesday.

I'm highly debating wether I should take my business somewhere else, but sadly the next closest shop is where I bought my quad from and it's a 2 hour, and a quarter tank, round trip. :(

Link to comment
Share on other sites

Just make an appointment. If they tell you to bring it on Tuesday, you then ask them will it be seen on Tues? They will tell you yes and then you tell them that you have some trip planned and you HAVE to have it back buy Thurs. Give them at least 2 days of working on it. They will usually say no problem we can have it done by then. Make them write it on the work order. Don't be afraid to raise hell. If you start giving hell about unhappy you are in the middle of their store in front of other customers, they will do what it takes to shut you up. Do you think they want possible new customers hearing how crappy they are? Go straight to the manager.

Link to comment
Share on other sites

Just make an appointment. If they tell you to bring it on Tuesday, you then ask them will it be seen on Tues? They will tell you yes and then you tell them that you have some trip planned and you HAVE to have it back buy Thurs. Give them at least 2 days of working on it. They will usually say no problem we can have it done by then. Make them write it on the work order. Don't be afraid to raise hell. If you start giving hell about unhappy you are in the middle of their store in front of other customers, they will do what it takes to shut you up. Do you think they want possible new customers hearing how crappy they are? Go straight to the manager.

Ha i'll see what i can do..:biggrin:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By Tuzz
      Bucking started about a month ago and works ok after 1/2 hour warmup.  Today while working on it i discovered that if i put the ignition switch in LIGHT position it runs fine right from the start.
      I'm stumped!  Any idea why this could be?  

    • By DarkRider
      This is something I'm extremely curious about. Has anyone ever attempted to buy a quad (or any other vehicle) from an impound lot? I've always wondered if this could be a bargain, or a waste of time. Google searches do turn up some helpful results. Looks like the state of NJ holds auctions online which I'd be a bit hesitant about.
       
      My online searches haven't really turned up any results of anyone buying an ATV this way. I'd be really curious if anyone tried this, or knows someone who has. I've actually found a couple pages with online auctions for my state, but none had ATVs.
    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By bco20
      does anyone have an owners manual or repair manual i could download ?i got a 2018 king quad 5oo eps special edition can not find either anywhere thanks
×
×
  • Create New...