Quantcast
Jump to content

  • Do you own an ATV, UTV or SxS? Join our Community Forum!

    QUADCRAZY ATV Community and Forum are FREE to join! We keep our ATV, UTV, and SxS forums clean and user friendly. All first time posters in our forums will have to wait to have their content reviewed and approved. Once your first ten posts are approved, you will no longer need to go through a forum post approval process. To bypass the approval process with immediate access and a NO ADS experience in our ATV, SxS, and UTV forums, consider subsribing to a Premium Membership

The 3000 Members Drive!


Recommended Posts

Members often ask how they can help QUADCRAZY.

We are currently at 1791 registered members!

We're going to ask for everyone's contribution here to make the push, and get us over that 2000 registered member count....:yes:

How you can help:

1. INVITE other riders via e-mail CLICK HERE

2. Use our banners on other sites like MySpace, other community websites, etc. You can find them HERE

3. Word of mouth to your fellow riders.

4. Share the forum threads with Bookmarking Sites by, Linking Back! Look Below:

linkback.jpg

5. Give us your suggestions on how to help spread the word!

* We'll update this thread on the member count as we climb to 2000.

* Moderators - please close this thread once we reach 2000.

Thank you for your participation!

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

UPDATE: Some community stats for those that are interested....

We are now at 1849 registered members!

244 are women, which make up 13% of the community.

1605 are men, which make up 86% of the community.

Members are from the following countries:

Afghanistan 1

Armenia 1

Australia 1

Austria 1

Canada 90

China 1

France 1

Georgia 4

Germany 1

India 1

Iraq 1

Israel 1

Mexico 6

Netherlands 1

Norway 1

Pakistan 1

Portugal 1

Sierra Leone 1

Turkey 1

United Kingdom 9

United States 1689

Yugoslavia 1

*Don't forget to refer the people you ride with to our community! Use the referral link in your account section....we'll be posting some stats for those down the road...

Link to comment
Share on other sites

yey :) :) :) i'm proud of being part of the 13% of girls on this site!!!

Can I shake 13% of your hand????

You don't want any of my friends here....they're all on medication :D

-TD

Link to comment
Share on other sites

  • 1 month later...

UPDATE:

Total Number of members: 1931

Of which 260 are women which is 13% of total members.

Then we have 1671 men which is 86% of total members.

Afghanistan 1

Armenia 1

Australia 1

Austria 1

Bulgaria 1

Canada 93

China 2

France 1

Georgia 4

Germany 1

Haiti 1

India 4

Iraq 2

Israel 1

Mexico 6

Netherlands 1

Norway 1

Pakistan 1

Philippines 1

Portugal 2

Sierra Leone 1

South Africa 1

Turkey 1

United Kingdom 9

United States 1759

Yugoslavia 1

Zimbabwe 1

Link to comment
Share on other sites

I don't have a printer right now but glovebox flyers would be cool. I'm not talking about walking through a parking lot pasting 'em everywhere but if you're out riding a public area and get to shooting the bull with another rider it would be cool to have a flyer with the site info to hand them.

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Maybe if there was more aimed at the utility quads we could get more members. The site overall seems to be geared more towards the sport quads. Don't get me wrong I love all ATV's but as a ute rider there isn't as much here for my riding style. I know there is a utility area but there's not much action in there.

I've really been racking my brain about getting more active members here so these are just thoughts. I belong to one other forum that is busy all of the time and the guys are nice with tons of knowledge but there is something I really like about this forum. I just wish it was as busy!

I think we need to spread the word anyway we can. I'd display a window decal on my truck if it was a cool design.....hint hint! I've also mentioned a flyer with the site info . I'm not too good at designing things but if someone where to come up with something and post it up so we could all print 'em as needed that would be cool.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By CaptJim
      Hello guys, I hope I am not invading your space, but as you can see the current state of my project here it's not but about 50% ATV. I am hoping that some one here can point me to a wiring schematic that I can reference since the "Complete wiring harness" i purchased from Amazon did not include a diagram of any kind.

      The ones that I am finding on line vary greatly but none show the connections for the separate 5 wire connector coming from the motor.

      Can someone tell me where these wires go?
       
      Thanks in advance for all help!
    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By kiriyaaoi
      Hello everyone, I just picked up an 02 LT-F250F the other day and have been in the process of tearing it down to fix some stuff- one of which was the cylinder base gasket leaking like a sieve. Well, I know why that is now, and I also discovered that someone had been in there before. I didn't take pictures, but it looks like it was probably run low on oil at some point, the cam journals and the "bearings" (for lack of a better term) in the head and the valve cover are totally wiped out, very deep grooves.  From what I know it's very difficult to repair aluminum in this way, so I'm trying to figure out where to go next.
       
      1. Have someone grind down the head and valve cover and fit actual bearings in since the aluminum is screwed, and have the cam ground down to match.  I have no idea what this would cost.
      2. Buy a replacement head+cam+valve cover.
       
      #1 I was hoping someone might have some advice on, but #2 seems like it'll (probably) be the more cost effective option.  However I'm running into some difficulty, it seems like the 2001 and 2002 models specifically use a different head part number,  11100-19B10, instead of  11100-19B01 like for all earlier models.  What exactly is the difference between them? There are obviously far more of the earlier heads because it ran for over 10 years.  Are they actually interchangeable? I've also noticed there are heads from the LT250EF that has 4 valve heads but also otherwise look identical.  Would those work as well possibly?  I'd like to not have to drop $500 on machine work or new heads on a $1300 quad that I'm already putting a bunch of new parts on.  Oh, and it has a new piston and the cylinder itself looks pretty good too, as I said someone was in here before me.
       
      Any help or advice would be greatly appreciated. I'll post pics of the carnage tomorrow.
         
       
    • By Suzukiquad
      I have a 97 Yamaha Timberwolf and it is beyond loud, is there any good options to silence them or at least make them bare able to drive. I know it has a crack in the exhaust pipe, but even with that fixed its still loud. 
    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
  • Similar Tagged Forum Content

  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...