sup guys, jus curious if anyone knows how to coat bare metal. what would i use to prevent rust w/out having a griesy residue? will any clear paint stick? i want the polished metal to show. cant afford a durablu at the time!
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check my MONSTER inspired rattle can atv project!
if u had something like a 3 in 1 oil to put on your frame so it wont rust and at the same time it will not show, that would be good. but the down side paint wont stick to oil so then again.... well good luck!
sup guys, jus curious if anyone knows how to coat bare metal. what would i use to prevent rust w/out having a griesy residue? will any clear paint stick? i want the polished metal to show. cant afford a durablu at the time!
Where do you need to cover? The frame above my pegs has been worn down to bare metal. Clean the metal, get any oil off and get some of this. Grip Tape It's a grip tape, comes in several colors. Will keep all the moisture off the metal. A plus for my needs was it helps keep your feet in place when in the air. When the insides of my boots grab it you're stuck. A plus for other needs on the frame is it will last longer than paint. Just as easy to replace if needed. Just scrape old sticker off, clean the metal and reapply.
Where do you need to cover? The frame above my pegs has been worn down to bare metal. Clean the metal, get any oil off and get some of this. Grip Tape It's a grip tape, comes in several colors. Will keep all the moisture off the metal. A plus for my needs was it helps keep your feet in place when in the air. When the insides of my boots grab it you're stuck. A plus for other needs on the frame is it will last longer than paint. Just as easy to replace if needed. Just scrape old sticker off, clean the metal and reapply.
its for my axle i polished it and it lasted a month but now theres rust blotches
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check my MONSTER inspired rattle can atv project!
For that, get some steel wool and rub the rust off. It's just superficial, then get some good clear coat. Put several layers on. It will chip off and wear away. Just reapply.
For that, get some steel wool and rub the rust off. It's just superficial, then get some good clear coat. Put several layers on. It will chip off and wear away. Just reapply.
For that, get some steel wool and rub the rust off. It's just superficial, then get some good clear coat. Put several layers on. It will chip off and wear away. Just reapply.
thats wat i thought w the clear coat, probably use the polyurathane, seems to kill competion for durability. and getting the rust int a prob ill jut buff it again. ii post a pic ofwat the axle looked like before. REVOLTING!
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check my MONSTER inspired rattle can atv project!
YES STEAL WOOL IS VERY AFFECTIVE although dont use it while painting cause ull find it all over wen u recoat! it sucks!
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check my MONSTER inspired rattle can atv project!
Favorites
Digg
Del.icio.us
Facebook
Furl
Magnolia
StumbleUpon
Google
Yahoo MyWeb
coating over bare steal 
Linear Mode
