Quantcast
Jump to content


1994 Honda 300 - Won't Light In Neutral


Recommended Posts

A couple days ago I went to start my fourwheeler back up after a short break from riding. When I turned the key, I noticed the neutral indicator light did not light up, even though it was in neutral, and the electric start would not work; it wouldnt even roll over. I have tested the neutral swith by the right foot peg according to the repair manual, and have successfully tested for continuity of the wire from the neutral switch all the way up to the CBI box in front of the steering column. Im really stuck on this one... any ideas? Thanks guys.

Link to comment
Share on other sites

usually it is a bad ground or broken wire in along the way. this sounds like it could be the switch itself. you can take one of the wires (i think there are 2 running to the neutral switch, but 1 is for reverse light i think, if applicable) and ground it out to the frame. now, if you do this, the light will stay on all the time, and you will be able to start it in any gear ...

Link to comment
Share on other sites

Thanks for the reply. I switched the reverse and neutral switch and reverse still works and neutral still doesnt. I checked the switches with an Omh meter and they appear fine. I have traced the wire all the way to the CPI and it appears fine and has continuty. The bike will kick start fine and I can jump across the selonoid and it will engage the starter. i switched out the alarm box with another that I knew was good and there was no difference. I have checked the fuses and they were fine. I removed all the wires in the battery box cleaned all the connectors to no avail. The bike ran fine until I turned it off and tried to restart it a few minutes later and there was no neutral light, with the bike in neutral, so I had to kick start it. I also removed the neutral switch pressed the switch against a ground and still no light. Any suggestions? I have had afew people tell me if it will kick start it cannot be the CPI. Is this true? I am running out of places to look. Thanks for any help.

Link to comment
Share on other sites

hi if already test the wires until batery,,,and continuity in the switch that activate the light on the motor lookfor a small black thing it is a diode quit and probe it with the ohmmeter.... or jumper the connector with an wire piece....luck

Thank you. I just removed the diode and and jumped across it and the neutral light came on, and the electric start engaged when prompted. Now on to Radio Shack to try to find a new one. Thanks again!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BruceG
      Hi guys. I have a problem where the quad will start and run well for about 5 minutes and then it dies. On inspection the airbox has oil in it (quite a lot). The oil is pumping through the cylinder head breather hose. This problem first happened suddenly. I have since done the top end including, piston, gaskets, rings and valves. I have also done the carb (not that I thought that this was the problem). The compression seems normal. The only thing that I can think of, is that I did not grind the valves well enough. Anyone experienced this? If so, how did you fix it? Any other thoughts?
    • By Tuzz
      Bucking started about a month ago and works ok after 1/2 hour warmup.  Today while working on it i discovered that if i put the ignition switch in LIGHT position it runs fine right from the start.
      I'm stumped!  Any idea why this could be?  

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By Starsat
      The choke lever doesn't stay in position on my 2001 Yamaha Kodiak.  The model is YFM 400.  I have to hold the lever to the choke position manually for some reason.  Any Ideas as to why?
    • By BlueBowtie
      Is it possible to put a motor from a big bear 350 into a timberwolf? Reason I ask is that I have a timberwolf with a bit of a rod knock, and I have big bear with a bad rear end and axle with a good motor. So, is it possible?
×
×
  • Create New...