Quantcast
Jump to content

Recommended Posts

Posted

If there is that much coming out, it's like DD said..there is too much getting into the combustion chamber. Have you changed your air filter recently? Just curious...make sure it's not clogged.

Posted

What dd said.also check your dipstick for overfill. And check spark plug. If excessivly oily. Might be time for a valve and/or ring job. How many miles on your unit?

All factors

good luck and good riding

doonorth

  • 6 months later...
  • 1 month later...
Posted

just took one apart doing same thing looks like it need piston rings and a valve job take off the head and look at the valves for soft oil carbon on intake valve and see how slopy the piston is in the cylinder

  • 6 months later...
Posted

first thought,

1.check not over filled with oil.vacuum line could be sucking oil. if dirty drain and replace quick solution could go thicker eg 20w-50 bike oil

2. check filter

3. spark plug what color?

4. compression if on the low side ~120psi its rings or valve. if high could be sticky or broken oil ring( if they are sticky, try SEAFOAM, and or intake cleaner, warm upto temp and add little and rev a little and then add more until it stalls. let sit for 30min and run it until warm and exhaust should stop smoking.

5. take head off check valve guilds.

6. check rings and bore size and roundness

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...