Quantcast
Jump to content

1995 Honda Fourtrax Rear Tires Not Moving


lasherb1

Recommended Posts

So I was out riding today when i noticed it didn't seem like i had a lot of traction. And it was really prevalent when i tried going up a small hill and only my front tires were spinning. The rear tires didn't move at all. What should I take a look at to fix the problem? anyone have ideas what happened. I just bought the four wheeler about a month ago. its a used '95 fourtrax...

Link to comment
Share on other sites

Sir

i dont know you, and i dont know how this website works at all,

i just know 2 things,

1- i'll try to give advise once in a while if its ok with u guys

2- i know atv's

i happend to come across this site when looking for a free download service manual, so far i havent find any, well, thats the web for ya....

Anywho...

Back to trx no wheels spining

you lack some info. Like is it a trx 300, trx350 etc.....my best bet is a trx300, cadillacs of the dirt roads

you mention no engine misbehaving, and never mention any kind of noise, thats goood

loosing an universal shaft or the differential whould make significant noise, and notice weeks ago, unless you were listening zztop on your walkman (my favorite)

so this is my best bet. Hope it is

easy check:

Go to the back of the atv. Get hold of the rear rack and crouch.

Now move the bike left and right...

See any movement on the wheels compare to the axle or the rest of the bike???

Now you may notice some clicking noise

if so, you need a new axle and hubs, hub nuts where a bit loose, dirt and friction did the rest

if you dont have the resourses for new parts, you can go to a welding shop, your friend next door may have a mig or an arc welder, take wheels off, take hubs off, clean the splines, put hubs back, tigth the hub nut as much as you can with impact whrench, now weld hub to axle around the inside,(brake side and differential side)

now weld 4 good poins around hob to nut side, just to keep it balanced, if not, the weld inside will brake

this weldin is easy to take off later, by means of hacksaw or any power tool, and will be able to install new parts (cutting just the welding, not the axle right?)

hope this help you

let me know if it did

happy trails..

Link to comment
Share on other sites

Thank you all for your advice.

I spoke to a atv mechanic last night and he said, based on my observations, to check the rear differential.

And would ya know I happened to have metal chips in the almost non-existent oil in the diff. So after knowing this I have come to the conclusion that I need a new ring and pinion, which is only a hundred dollar or so fix. I appreciate all your advice and suggestions.

I'll keep everyone up to date and maybe will have pics coming soon

Link to comment
Share on other sites

I would say it's the utility 4x4 300. The utility 2wd and 4x4 have been known to blow rear ends if rearend oil is not maintained.

I would have to agree..it's a Fourtrax as per the title. Plus he said the front tires are moving...:wink:

So after knowing this I have come to the conclusion that I need a new ring and pinion, which is only a hundred dollar or so fix. I appreciate all your advice and suggestions.

I'll keep everyone up to date and maybe will have pics coming soon .

I figured it was the rear. Most likely your seals dry rotted and caused the diff fluid to leak out over a period of time..then friction took over... Double check your hub seals.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By Suzukiquad
      If you had to choose one mod that you couldn't live without, or had to recommend one what would it be? 
    • By 1998Zuki250
      What are your riding location preferences? Mud Park? Personal Trails? Public Land?
    • By p5200
      I'm assuming, it's alright to test the engine after adjusting valves without the rear axle installed? Can someone please verify this? I'm waiting on axle parts and wanting to get that done while waiting. Thanks! 🙂
    • By p5200
      Hello folks, my machine wound up with I think water in the tank etc. It runs but speeds up and slows back down randomly. When not running I don't see gas dripping  from the drain nipple on bottom of float bowl and drain screw is closed tight. With normal idle speed I see no leaking. When the idle speed increases quite a bit on it's own, gas appears to start slowly dripping from float bowl drain nipple? I'm wondering if the carb is flooding and the gas is actually coming from higher up and just appears, to be coming out of nipple but, is actually running down the sides of the nipple? I put a kit in the factory Mikuni carb last year after sitting for a while and I think the gas in the jug I used had drawn moisture. I plan to pull the carb tomorrow and clean everything out. I was just curious if anyone else thinks it's probably something in the carb and is, acutally a flooding problem? Thanks Folks! 🙂
×
×
  • Create New...