Quantcast
Jump to content


Polaris Outlaw 450mxr "XC build"

realFReEK
 Share

Recommended Posts

Havok Apprentice

Havok

Posted
Posted

Man its gona look and ride awsome when you are done and i love hose arms i had a set of wicked arms on my raptor and loved them but i will tell you they won't take slam down doing a wheelie doing about 50 through a field (like a dumbass) bend my upper arm and tierod and snaped the lower balljoint lol!!!!!!! anyway if you would tel me what you like and dislike about your outlaw because it is at the top of my list for my next quad

Link to comment
Share on other sites
realFReEK Rookie

realFReEK

Posted
  • Author
Posted (edited)
Man its gona look and ride awsome when you are done and i love hose arms i had a set of wicked arms on my raptor and loved them but i will tell you they won't take slam down doing a wheelie doing about 50 through a field (like a dumbass) bend my upper arm and tierod and snaped the lower balljoint lol!!!!!!! anyway if you would tel me what you like and dislike about your outlaw because it is at the top of my list for my next quad

Thanks! I love the Outlaw. No real dislikes. But the front wheel bearings wear out pretty quick.

Nice!! Hey RelaFreak are you really that old? 79 and doing all of this?..

79 and counting.... no not really just havnt changed my info.

Edited by realFReEK
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • BruceG
      2005 Bruin 350cc Oil pumping into airbox
      By BruceG
      Hi guys. I have a problem where the quad will start and run well for about 5 minutes and then it dies. On inspection the airbox has oil in it (quite a lot). The oil is pumping through the cylinder head breather hose. This problem first happened suddenly. I have since done the top end including, piston, gaskets, rings and valves. I have also done the carb (not that I thought that this was the problem). The compression seems normal. The only thing that I can think of, is that I did not grind the valves well enough. Anyone experienced this? If so, how did you fix it? Any other thoughts?
    • Charlesbrown
      Anyone use Niche parts?
      By Charlesbrown
      I’m looking for a top end kit for a Yamaha. I would like to see how well the engine runs before spending $6-$7 hundred on oem. Niche has complete kits from $1-$2 hundred.  Anyone have experience with Niche or similar Chinese companies? 
    • olddude
      Aftermarket parts...
      By olddude
      Just wondering where you guy's an Gal's get your parts. I love buying OEM stuff but sometimes they just cost to darn much for what they are. I know, I know everybody needs to make a living but dang! $ 97.00 for brake pads on one side of the front of my KingQuad. There has got to be a better way.
    • Nadamamasboy
      1988 Suzuki Parts Availability
      By Nadamamasboy
      I have an '88 250 that's going to need some repairs. Are parts still available for these older machines? Thanks in advance 
    • 97kingquad
      2000 arctic cat 300 4x4 rebuilding!!!
      By 97kingquad
      Ok so I'm back lol 
      I got two arctic cat 300s that I am either trying to make one of the two or if possible I'll get them both running. I have a good start but I am struggling to find a wiring diagram that actually shows the connections.
      Both bikes were tore apart and some wiring was spliced and all screwed up so I have been tracing wires and redoing the connections. 
       
       
      On one bike I have a neutral light and it will let the use e start to turn starter motor, thing is on that bike the motor is stuck engaged so when I pull the pull cord it's turning the starter motor as well. 
      On the other bike it is free and works as it should but I can't get the neutral indicator light to come on. Or any for that matter. I have been going through the fuses which all have power as well as the e start switch. 
      I'm wondering if anyone has come across some similar issues, I am checking the neutral switch tonight, I have been checking the wiring and comparing it to the bike that is working (in that sense) but both bikes are missing some things 
      I'm wondering if it is a better option to pull the good motor out and rebuild it then put it into the bike with the indicator lights working. But on that bike all the bushings and linkages are toast so there's a lot of work to either bike. I'd like to at least get the engine to fire up before I invest too much energy into swapping motors.
      So if anyone has some info or can send me in the direction of a good wiring diagram it would be much appreciated. Thanks 
       


COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...