Quantcast
Jump to content

2011 Yamaha Raptor stolen

Geis25

By Geis25
in Stolen ATVs

 Share

Recommended Posts

Geis25 Rookie

Geis25

Posted
  • Author
Posted

No insurance... My fault should've got it insured. Storage is gated and advertises surveillance. When questioned they told me the cameras were decoys. Now seeking legal advice on whether or not the facility can be held accountable. Total mess. :/

Link to comment
Share on other sites
  • 2 weeks later...
Geis25 Rookie

Geis25

Posted
  • Author
Posted

No significant damage. Guy put almost 400 miles on it?! Bent up swing arm skid and some scratched up plastic but nothing too bad. Kudos to my bad as* 53 year old father who got it back baseball bat in hand. Re-planning our fathers day Hatfield n McCoy trip! Yeaaaaa hope to see the thief on the local trails....

Link to comment
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
quadnut20 Grand Master

quadnut20

Posted
Posted
No significant damage. Guy put almost 400 miles on it?! Bent up swing arm skid and some scratched up plastic but nothing too bad. Kudos to my bad as* 53 year old father who got it back baseball bat in hand. Re-planning our fathers day Hatfield n McCoy trip! Yeaaaaa hope to see the thief on the local trails....

Glad to hear the good news !!:yes: I would of beat the thief with the bat on the spot !!:beatdeadhorse5c:

Link to comment
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • ResQ91
      Help with 1987 Yamaha Big Bear YFM350FWT Carb
      By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave
    • CaptJim
      New member intro and needs help.
      By CaptJim
      Hello guys, I hope I am not invading your space, but as you can see the current state of my project here it's not but about 50% ATV. I am hoping that some one here can point me to a wiring schematic that I can reference since the "Complete wiring harness" i purchased from Amazon did not include a diagram of any kind.

      The ones that I am finding on line vary greatly but none show the connections for the separate 5 wire connector coming from the motor.

      Can someone tell me where these wires go?
       
      Thanks in advance for all help!
    • luckyyyyesther
      need help choosing UTV soundbar gift plz (~$300 Budget)
      By luckyyyyesther
      Hey all!
      I'm on a mission to buy my first UTV soundbar as a gift for my dad(a newbie on ATV). I'm aiming for something that offers great sound quality without breaking the bank – my budget is around $250. Right now, I'm considering options like ecoxgear, kemimoto, and boss.
      Does anyone have experience with these brands or specific models that you'd recommend? Any advice or suggestions would be super appreciated!



    • opnea
      1991 Suzuki Lt230E Help
      By opnea
      Recently picked up a 1991 Lt230e for repair. Compression is a little low Id say, around 80psi, I also have spark but the spark is odd . When cranking the spark is a constant arc. I’ve got it to sputter but never fully turn on. I believe the spark is my issue, being constant and not detonating at the right time. I’m not sure whether this issue is an electrical fault like some missing ground, a faulty cdi, or a timing issue. Any ideas where I should start? 
    • p5200
      2005 500 Scrambler acting up above idle speed need help
      By p5200
      I added more fresh gas it sat one day now, it's acting up again. Before cleaning out carburetor it wouldn't idle good and had gas leaks from carburetor. Now it idles pretty good but, if I increase throttle speed at a certain amount it starts missing bad. I'm going to try and post a short video. Just about ready to give up on this thing.😒  you can see reflection perking in video.

      20240217_114429.mp4

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...