Quantcast
Jump to content

Recommended Posts

Posted

Finally solved the carb problem after removing it a number of times. I cleaned every part except the center hole in the pilot jet. That's why I had so much trouble with the choke and high idle. The quad now starts first pull, idles up a little and goes to low idle after it warms up. I checked all the other carbs that I have and every one of the pilot jet center holes were plugged solid. I used a fine torch tip cleaner to unplug them. Thanks for the reply and info. I now have the Mikuni carb schematic on file. Will post some pictures, once I get the body work done.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...