Quantcast
Jump to content


2007 Suzuki ltz400 - Wont Run


jhouts1587

Recommended Posts

ok, first time on here so be patient please and im sorry if i forget anything or have to much. ok so i have a 2007 suzuki ltz 400. first thing was that it all of a sudden just starting acting weird. it has all of its power when running fine but it has moments to where it acts like it is starving for gas. it will run then it just wants to die. then i can wait 20 mins and ride it and it will b fine for a little bit for like 20 mins of riding. and that started happening first. then i got a yoshi slip on and put it on and then took it to the sh op and got the carb cleaned and jetted for the slip on. changed the oil and etc... then after it got rejetted it ran fine for a day meaning about 1/4 of a tank of gas. then same thing starts happening. so i figured something got stuck in the carb somewhere in one of the jets, i cleaned the carb completely and cleaned out the petcock and tank. still doing the same thing. just taking spells from one start up to another. after that the only thing i did was was checked to see if it was geting gas to the carb and it is. so i dnt know if it could be in the electrical like the cdi or what, Please help im desperate to get it fixed before warm weather. if you need other information just ask. Thanks

Link to comment
Share on other sites

ok, first time on here so be patient please and im sorry if i forget anything or have to much. ok so i have a 2007 suzuki ltz 400. first thing was that it all of a sudden just starting acting weird. it has all of its power when running fine but it has moments to where it acts like it is starving for gas. it will run then it just wants to die. then i can wait 20 mins and ride it and it will b fine for a little bit for like 20 mins of riding. and that started happening first. then i got a yoshi slip on and put it on and then took it to the sh op and got the carb cleaned and jetted for the slip on. changed the oil and etc... then after it got rejetted it ran fine for a day meaning about 1/4 of a tank of gas. then same thing starts happening. so i figured something got stuck in the carb somewhere in one of the jets, i cleaned the carb completely and cleaned out the petcock and tank. still doing the same thing. just taking spells from one start up to another. after that the only thing i did was was checked to see if it was geting gas to the carb and it is. so i dnt know if it could be in the electrical like the cdi or what, Please help im desperate to get it fixed before warm weather. if you need other information just ask. Thanks

Link to comment
Share on other sites

most times if it runs good for 20 minutes, then starts going crazy not wanting to run right, is because of a bad coil. a cold coil will run good until it heats up, then goes for a crap. not saying that is what is wrong with yours, but something to look at. look at your spark with the plug out and grounded to the motor and crank it over. probably really bright blue. run the bike until it starts acting up again and pull the plug and do the same thing. could be dimmer. im not sure there is a test that would 100 per cent tell you its the coil ... maybe someone else will jump in and give you a few ideas ...

Link to comment
Share on other sites

ya I forgot to mention it has brand new coil and plug and I could understand that if it was a constant like that but even sometimes if I haven't started for a day or so the problem sometimes starts right on the first start within like a minute also sometimes when it is acting up it sputters really really bad

Link to comment
Share on other sites

I'm not familiar with your machine, but could be a fuel issue.

1. Check that your fuel tank vent is not clogged.

2. Check if the choke is stuck.

3. Disconnect the vacuum suck line from the carb to the fuel tank valve and select to reserve. This is to check if the carb is sucking in fuel from the valve simulating a choked condition.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By Uglyside38
      I have a 1988 Quadrunner 250 2wd. My brother in law sold it to my son for $20...had been sitting outside for several years. Got it home and had it running in about 30 mins. Ran it a bit and then went to looking at the carb as it was having trouble idling. Was getting it pretty close, then started losing spark...Also, it wouldn't start up every time...only about 1 in 5 tries. Anyway...now, it has what I can only describe as "intermittent" spark. I can get 1 light spark right when the start button is pressed and sometimes one when it's released...but none while cranking. 🤷‍♂️

      I have replaced the spark plug, ignition coil/wire, and traced wires best I can. I noticed a couple frayed wires at the pickup coil where it enters the case. So, now I have the cover off, stator and pickup coil out and trying to test the coil. I do have about 114 ohms resistance for pickup best I can tell. And I can read minute voltage when I drag a magnet across it. Could it still be bad? Can a bad ignition switch/button cause this? (I did have the switch off to oil the choke cable)...pulling rope makes no difference though...any ideas or help would be greatly appreciated!!! It's the intermittent part that's throwing me off! 

    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By skittle021
      So I've got a Hisun 550 that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
      To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
      Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
      Photos: 
       





×
×
  • Create New...