Quantcast
Jump to content

2004 suzuki LT-z400 problems. HELP!!!


kkkyle

Recommended Posts

I just bought a 2004 Suzuki Z400 from some guy in utah. i brought it all the way home in wyoming. it runs fine at first. then after awhile of riding it starts bogging down and choking up and dying. then it won't start for awhile like it's over heated. but the Temp. light and fan don't turn on. it's some kind of endurance problem. any help?

Link to comment
Share on other sites

  • 2 weeks later...

How long is a while, I have the same quad and my fan usually comes on within 5 to 10 minutes of riding. Also check to make sure the radiator itself actually has coolant in it Ive found mine empty before but the fill bottle on the side was full. Without fluid the sensor on the radiator wont read to turn the fan on. Im not sure this will fix your problem, but I'd check it your fan should be coming on.

Link to comment
Share on other sites

being a 2004.

check your choke cable.

There are lots of LTZ400 that the choke plunger in the carbi or the cable gets rusty and when you pull the choke on, it cant turn off. Even tho you and push the thumb lever back to its starting spot, the plunger can still be out making the bike run rich with fuel and stop the bike and kill the spark plug.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By Louznmemind
      Howdy y'all, I'm trying to fix a neighbors 2015 Brute Force 300. Came in with hard to start and won't idle except on choke issue. I pulled the carb and found the pilot jet as well as the emulsion tube partially clogged. Cleaned up everything, put it back together, still having issues...  It will start right up on choke and will also start off choke if you give it just a touch of throttle but it absolutely will not idle unless it's choked just a touch. Also, excuse my ignorance but I'm assuming the "dial" thingy attached to the carb that turns in and out is for setting idle?? 
    • By Tuzz
      Bucking started about a month ago and works ok after 1/2 hour warmup.  Today while working on it i discovered that if i put the ignition switch in LIGHT position it runs fine right from the start.
      I'm stumped!  Any idea why this could be?  

    • By dalton7545
      ive had an account for years.   cand dowload a manual tho   havent posted enought so here is a post
×
×
  • Create New...