1 post in this topic
:confused:need a repair manual or help in what to look for thank you Bill
for you muddober to make clear to you the neutral light and the gear light
do not light up win shifting fuses are good Iuse my CAt for hunting im dissable the atv is my leag s thank you
This is my first post and I was wondering if there is anyone who can help me solve a problem I have with my Yamaha Kodiak 400 4x4 Fitted with a Mikuni Carburetor . The year of the quad is around 1998, the reason I am not sure of the date is, there wasn't any paperwork and no details on the frame either.
The quad had a bad leak from the carb overflow which indicated that the float needle valve was blocked or passing so I replaced this and put everything back together. The quad ran really well until I took it onto some rough ground to have a ride around, a few hours later the engine started to run really rough as if the engine was flooding. I have removed the carb again and cleaned the needle valve out and the whole of the carb just in case there where any dirt behind it. Engine now runs fine again but fuel has started to run out the carb overflow again.
I have tried everything to try and stop the fuel leaking out the overflow but its still happening. My last thoughts where to adjust the float level and its still happening.
Has anyone got any thoughts on the problem or could suggest whats causing the fuel leaking out the overflow.
Thanks for reading
How hard is it to change the outer seals on the rear differential mine are leaking fluid and I have no idea on how to change them out any help would be great thanks
I've got a 2005 Brute Force 750 that just had the main timing chain replaced (It broke) along with a couple valves (Bent). The engine work was done by my Mechanic but I removed & reinstalled the motor.
Put it all back together and it fired up nicely. I let it idle for a bit and pulled the dipstick to make sure I hade enough oil in it. Major pressure coming out of the crankcase, it was as if I had my hand in front of the exhaust! Tons of coolant in there as well!
The guy who rebuilt it is very good and I know I put it all back together correctly. He obviously missed something, anyone have any thoughts?