Quantcast
Jump to content

Recommended Posts

Posted

Is the Yamaha Rhino destined to go the way of the Honda ATC?

Commentary by Jon Crowley, UTV Guide

June 1, 2009

I was interviewed last week by a freelance reporter who is writing an article on the Yamaha Rhino and I got to thinking about the future of sport UTVs. Are Yamaha Rhinos, as well as other sport UTVs headed in the direction of the infamous Honda ATC three-wheeler from back in the 1980’s?

If you remember way back when in 1982 (it really wasn’t that long ago), Honda introduced the ATC 200 Big Red. The ATC was a great machine, but as popularity exploded, so did the accident rate.

20090313_020113_honda-atc70.jpg

Honda ATC Three Wheeler

The increase in accident levels lead to an investigation by the Consumer Product Safety Commission (CPSC). In 1986, CPSC statistics suggested that most accidents were due to improper rider behavior that ignored manufacturer warnings. No inherent flaw was found in the three-wheel design.

Honda's owners manual and product warning labels stressed the importance of proper operation to its customers. Through a national industry safety campaign, there was a 33 percent decline in recorded CPSC injury statistics between 1984 and 1988.

Nevertheless, in 1988, ATV manufacturers entered into a 10 year agreement with the CPSC. Under the agreement ATV manufacturers made a $100 million commitment to expand safety programs. Additionally, even though three-wheel ATC sales were dropping off, manufacturers agreed to stop distributing ATCs in the U.S.

If history is bound to repeat itself, the sport UTV is headed in a similar direction as the ATC three-wheeler. The Yamaha Rhino is currently the biggest target, and Yamaha has worked out an agreement with the CPSC to “repair” existing Rhinos. Yamaha is facing an onslaught of lawsuits from users that for the most part have tipped their vehicles over and have been injured or killed.

From what I have seen in reviewing many of the accidents, a lot can be blamed on users not following manufacturer guidelines for proper use. For example, here are the two most recent accidents that happened in May 2009:

13 Year Old Dies in Rhino Rollover

Father Dies, 5 Children Injured in Rhino Rollover

The accidents are tragic, that is for sure. But if you look past the typical inflammatory reporting that blame the machine, you will find that in both instances, many guidelines were completely ignored that would have either prevented the accident or surely lessened the severity.

In the case of the 13 year old boy, he was not wearing a seat belt, he was under 16 years old, the Rhino was new (lack of experience), he was not wearing a helmet and there was no adult supervision.

With the father that died in the roll over, the Rhino was carrying one driver and 5 children as passengers in a two person vehicle. No one had seat belts on, and the father was carrying his one year old son on his lap.

If I am reading the tea-leaves correctly, I can see that improper use of sport UTVs will soon affect the types of vehicles that manufactures are allowed to build. Will the CPSC step in and limit how powerful side x side vehicles can be? Will helmets become mandatory equipment just like they are in California for ATVs? Will manufacturers be forced to add even more safety equipment? A riding lawn mower with doors, window nets and roll cages that create a safety bubble around occupants isn't too far fatched if you get where I am going here.

Even though the vast majority of side x side vehicle owners use their vehicles without incident, all of these lawsuits, the bureaucrats at the CPSC and our efficient lawmakers are going to force manufacturers to limit how much fun we can have in our beloved UTVs. That is the sad truth.

There are many more accidents involving bicycles per capita than there are in UTVs. If you apply the same logic to bicycles, manufacturers would have been forced to include a protective bubble around all bikes sold in the U.S. many years ago. But there are a few critical difference between bicycles and UTVs. First off, people have long ago accepted the fact that you may fall off your bicycle. And secondly, there isn't a specific manufacturer (aka cash cow) for a class action lawsuit so the lawfirms aren't interested.

Just because you have an accident and then see an advertisement on the TV or on the internet from a lawfirm talking about accidents in a Rhino doesn't mean there is a problem with the vehicle.

Here are a few guidelines to remember to help keep you safe in a side x side vehicle:

Always wear your seat belt

Always wear a helmet

Don't drink and drive

Keep arms and legs in the vehicle at all times

Abrupt maneuvers or aggressive driving can cause rollovers even on flat, open areas

Children under 16 should never drive a side x side vehicle

Beyond following the guideline provided by vehicle manufacturers, use some common sense and take responsibility for your actions. Be sure to learn the limits of your vehicle and your driving ability.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By flyinbrian365
      View File 2023 Yamaha RMAX4 Wolverine 1000 service manual
      Factory service manual
      2023 Yamaha RMAX4 Wolverine service manual
      Submitter flyinbrian365 Submitted 06/08/2026 Category Yamaha UTV  
    • By flyinbrian365
      View File 2021-22 Yamaha RMAX4 1000 Wolverine service manual
      Factory service manual
      2021-22 Yamaha RMAX4 1000 Wolverine service manual
      Submitter flyinbrian365 Submitted 06/08/2026 Category Yamaha UTV  
    • By hengstserepair
      Howdy ya'll. I am working ona 2000 Yamaha Breeze 125. It was in rought shape when I received it and I am working through issues as they pop up. The quad had been sitting for years. I was able to get her running again, but I need your help with the following issue:
      I don't trust the transmission yet and I don't want to make problems any worse. So, I haven't pushed things hard at all. Low rpms, less than 5mph in reverse.

      Nuetral: Runs as expected
      Reverse: She seems to be driving fine at slow speeds. Going into reverse at idle is fine, coming out of reverse back into neutral won't work (the shifter is just stuck). As soon as I turn off the quad, I am able to shift around without any issue.
      Forward: It slips. It seems to only transfer power to the wheels on a smooth surface and going slightly downhill. When shifting into forward at idle, there is a clacking sounds during the transition. Shifting back to nuetral works just fine.

      Other Notable Symptoms: There was old oil in the vbelt and when I was tuning the carb, it starting blowing out of the CVT cooling vent at the front of the quad. Made quite a mess. There is positive crankcase pressure due to piston blowby, that I have not decided whether or not I am going to fix (customer budget dependant).  Since the oil was old, much darker than the new oil that is in the crankcase, I am thinking it seeped past a bad seal while it was sitting for years. The oil that was in it when I first got it had gas in it.

      Thoughts: I am thinking maybe there is an issue with the clutch. I worry about the old oil intermingling with the dry centrifugal clutch. I was thinking my next step would be to take the cover off of the clutch and inspect it.

      Let me know what you all think. Any advice and ideas is greatly appreciated. This is only the 3rd quad I have worked on and I have a lot to learn.

      Lorne
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
×
×
  • Create New...