Quantcast
Jump to content

  • Do you own an ATV, UTV or SxS? Join our Community Forum!

    QUADCRAZY ATV Community and Forum are FREE to join! We keep our ATV, UTV, and SxS forums clean and user friendly. All first time posters in our forums will have to wait to have their content reviewed and approved. Once your first ten posts are approved, you will no longer need to go through a forum post approval process. To bypass the approval process with immediate access and a NO ADS experience in our ATV, SxS, and UTV forums, consider subsribing to a Premium Membership

2000 yamaha warrior wont start with new stator


jjsoren

Recommended Posts

hey guys, just put in a new stator on my warrior and now I have no spark at all. Could anyone give me some advise here? I think if I was close to a cliff right now I would push this quad off of it. Thanks in advance. Ok last night I was messing with the wiring and tried to start it and i started getting spark. So i put the plug back in the motor and then nothing. I can pull start it and it will run but it is backfiring like crazy. It ran great until the stator went bad now all these problems. Any advice would be great

Edited by jjsoren
add more info
Link to comment
Share on other sites

Thanks for the reply. I have checked the timing it is right on. As for the valves I have not checked. The funny thing is it ran fine 4 days ago then the stator went out I replaced the stator. So I checked for spark and when I used the electric start it was random when I would get spark. One time I would get spark the next nothing. So I tried pull starting it and it started right up but now it has a backfire out the tailpipe none stop. The stator is good because it has a bright blue spark and the spark will jump a 1/2 inch to ground out. This is just so frustrating I just want to RIDE!!!:aargh::aargh:

Link to comment
Share on other sites

Thanks MIKEL5469. I downloaded one earlier. I noticed when I was testing everything that the plug would have a small spark when I would first hit the start button. I just can figure out why I can pull start it but it wont start using the electric start.

Edited by jjsoren
Link to comment
Share on other sites

I have replaced battery, coil,stator,pickup coil, checked timing, talked to yamaha mechanic and he said it sounds like the cdi. He said the problem with electrical is if one part goes bad its a chain reaction because everything else tries to make up for the failing part. I purchased a new cdi, I will let you guys know what happens Thanks for everything

Link to comment
Share on other sites

Thanks everybody for the help. I replaced the cdi and it still wouldnt run. So, I went through everything again. Tested the pickup coil and the ohms tested low replaced it again and the fourwheeler started right up runs like a champ. I was told that more then likely the cdi box shorted it out. who knows I am just glad that it works. Thanks again

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...