Quantcast
Jump to content

grego86

Members
  • Posts

    5
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

grego86's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In
  • Conversation Starter

Recent Badges

0

Reputation

  1. grego86

    grego86

  2. Someone locally told me it prob has a punch out in it. Does anyone know if my model does or not?
  3. My front dif is leaking oil pretty bad around the yoke. I completely pulled the whole dif from my bike and now stuck trying to get the yoke unbolted from the dif body. There's a large nut in the center of the yoke and I've tried using impact wrench and not budging. The nut and bolt kind of looks like it has a crimp spot made to keep it from backing off the bolt I guess. Does that sound right? What's the easiest way to remove it? Just soak with some type of lube and try again with the impact?
  4. I have a 1988 Big Bear 350 4x4. I had to take apart my front brake pistons and thoroughly clean them. The internal gaskets appear new from when I had bike shop I thought do a brake repair. Seems like they just replaced gaskets and didn't bother cleaning or clearing any of the trash from system. I put everything back together and try bleeding system and pumping up brakes. The front piston on both sides will just barely build up and it does hold and when I bleed them I get a solid stream of fluid so don't believe there is any blockage. Also to note the bleed valve is after the rear piston on each side so fluid is reaching it but for some reason not building pressure I'm guessing. How can I tell if I need to rebuild my master cylinder ? Pic - the piston on left is before and right is after I cleaned one.
×
×
  • Create New...