Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

witness7

1997 Yamaha Kodiak 400 4x4 manual trans.

Recommended Posts

Since day one of owning the Kodiak I have not been able to shift gears going up steep roads nor down steep roads, it will shift gears fine going straight on a road though. But if i start out going up a steep road in 1st gear no matter how i try while moving it will not let me shift into 2nd gear ..etc... unless I stop then I can change into 2nd gear

its the same way if I am going down a steep hill what ever gear I am in I have to stay in that gear till I stop and change to another gear.

but again it is fine if I am driving on a straight road is this normal? if not is there a way to adjust it maybe a linkage to adjust to where it will shift easier when I use my foot to try and shift uphill or downhill..

I recently drove a small kawaski 220 and it shifts easily going up a steep road and down it without having to stop to shift.

Would appreciate some insight from someone that knows about these type of atvs when it comes to shifting them. Thank you

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By mothrottle
      The VIN on my 2018 Kodiak 450 is not where it's supposed to be. I bought this used. Is there another "hidden" location where I can find it? Need the number for insurance co. Thanks in advance.
    • By Gordon cousins
      I have a 1991 Big Bear 4x4   Shifter on top. Any one know if a  1994 Big Bear 4x4 Shifter on motor can be swapped 
    • By Dwight Williams
      I have a 99 Kodiak 400 4X4 that I picked up for $300.  The previous owner had modified the foot shifter by welding a piece of rebar to it so he could hand shift while plowing.  As you can imagine, the allows for much more torque on the shifter than it was designed to have, and he broke the stopper off of the the shift mechanism.  No big deal, I ordered the part and put it back together, went through the carburetor and off we go, it runs pretty good.  
      The first thing I noticed is that when I put the shifter all the way down it goes into reverse, I'm supposed to twist a knob to get it to reverse but this seems to be disabled.  Also, once in reverse, it's a bugger to get back out.  I have to hold the shifter up, then quickly back down and up again to get it to come out.  All forward gears work fine, clutch is tight, no problems.
      The reverse cable and lever are in tact and seem to move freely.  
      My question is this:  What does one normally have to do to get this thing into reverse?  I assume put it in neutral, twist the knob, kick the shifter down.  Does the brake need to be applied?  I'm not sure what's going on here, I suspect it's been 'modified' as it goes into reverse without the proper precautions, just not sure if the mods were external on internal.
       
      thanks
    • By Adrian Ciotinga
      So I’ve had this quad for the better part of a month, and it’s been hard to start since the day I bought it. Once it warms up it idles just fine and has plenty of power and starts no problem, but cold it takes 20 seconds minimum of straight cranking to start it.
      It’s not really too big of an issue, I’m just curious as to why it takes so long. Earlier today, it took me about 2 minutes of on/off cranking to get it to fire.
      i have attached a video of a cold start to show you what I mean.
      FullSizeRender.mov
    • By gouletp
      When it is  cold outside, say 35 deg F and colder, it is very difficult to shift to Reverse from neutral.  Engine temp doesn't have an effect.  I apply the brakes hard with the hand lever and the foot pedal.  In another post I read that high idle can affect shifting when the engine temp is warm. 
      I will try it with lower idle speed once I find the screw.  In the interim, can you tell me if there is some sort of adjustment for the shifter?
      Thank you
  • Similar Tagged Content

    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By dyyjrr9
      I just got a 1991 Yamaha Moto 4 for my son and I am looking for a service repair manual. I know that the timing chain needs replaced.
    • By alexcross324
      Hi all, I try to find this manual in the threads but you have a lot of stock here
      Cannot find this particular manual.
      I found it for YFM200 but not sure if they are the same.
      Thanks if you could help me with that.
      Im new here so if I did something wrong, please tell me.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...