Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

raceware

N a Good Problem Sover...Scrambler 90

Recommended Posts

I have a 2001 90 Scrambler, runs for about 50 feet & dies, after it stops electric starter barely spins it, kicks over fine but won't start again for about 5 minutes, then same thing. I just got thru installing new piston & jug, new carb with electric choke. Just needed to replace the choke it wasn't working right but I thought I was purchasing just the choke but was surprised when the new carb came in, FYI the new carb is longer in height than the original if anyone thinks that might be the issue. Tried moving the needle around , check gas petcock getting good gas.. I installed piston with arrow pointing down or front of motor.....I am baffled. Need a Good problem solver!!!!

--------------------------------------------------------------------------------

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Chase Cook
      I have a Polaris sportsman 500 and I just replace the piston in rings and head gaskets on it and I made sure the timing was exactly right it's getting gas and fire but it still won't start. It sounds like it has low compression but at the same time it sucks in air pretty good from the intake. Also the valves are adjusted to spec. It did start the first time I installed the Piston and Rings but it only stayed running for 5 seconds with starting fluid and then it shut off and then I tried to turn on the next day and it didn't do nothing and I've been going at it for three weekends now and it still ain't doing nothing. I wonder if i set the timing off a little or a lot if it would start up, because I inline the crankshaft sprocket with the crankcase timing line like it said in a manual and the two points on top of the cam sprocket to top dead center of the piston. I even took the spark plug out and stuck a camera light in there to make sure it was top dead center and it still won't do anything. AlsoI drain the carburetor some and shut d fuel petcock off to see if it was getting too much gas and that still isn't the problem. And where I live all the darn mechanics that work on Polaris ATVs are booked for two weeks which sucks and I need hope immediately or I'm just going to set the ATV on fire because I'm getting very frustrated with this crappy brand. Every other name brand ATV I worked on I got it running right and I replace the piston, rings and everything etc, and they started up fine. But this is starting to get very frustrated and I don't know who to talk to who had this problem before, who "don't have to come look at it". Cuz when they say that that means you're not going to come look at it until 2-4 Weeks later because there booked, which I don't have time for. Living in northern part of Florida sucks.
    • By Chase Cook
      I have a Polaris sportsman 500 and I just replace the piston in rings and head gaskets on it and I made sure the timing was exactly right it's getting gas and fire but it still won't start. It sounds like it has low compression by the same time it sucks then are pretty good from the intake. Also the valves are adjusted to spec. It did start the first time but it only stayed run for 5 seconds with starting fluid and then it shut off and then I tried to turn on the next day and it didn't do nothing and I've been going at first three weekends now and it still ain't doing nothing. I wonder if i set the timing off a little or a lot if it would start up because I inline the crankshaft sprocket with the crankcase timing line like it said in a manual and the two points on top of the cam sprocket to top dead center of the piston. I even took the spark plug out and stuck a camera light in there to make sure it was top dead center. And where I live all the darn mechanics dot work on Polaris ATVs are booked for two weeks which sucks and I need hope immediately or I'm just going to set the ATV on fire because I'm getting very frustrated with this crappy brand. Every other name brand ATV I worked on I got it running right and I replace the piston, rings and everything and they started up fine. But this is starting to get very frustrated and I don't know who to talk to who had this problem before, who "don't have to come look at it". Cuz when they say that that means you're not going to come look at it until 2-4 Weeks later which I don't have time for.
    • By amharrison24
      i have a 91 moto 4 100. has electric start only. for as long as i could remember we have always pushed start it. after riding for while you shut it off. you are able to hit the start button and it will start right up. anyone know where i should start with fixing this issue? im fixing it up for my niece. thank you in advance.
    • By Dra O
      posted a while back - it was running at one point - I have all the plastic shroud off - it's down to frame and engine now
      -fuel pump: when line from petcock is attached, no fuel comes out other side to carb; the line to the carb is open (can blow through it); I thought when I cranked engine that the pump would spit out fuel on other side but it does not; I removed fuel pump and opened it up - diaphragm looks good - but internal areas had lotsa calcification build up - I cleaned this out and dried it good - the clear plastic pieces (?diaphragms) aren't broken - the spring w/ steel ball on end moves freely; am putting it back on tomorrow; but can anyone answer about the pump? isn't it supposed to pump fuel through it... to other side... to carb? puzzling
      -along with fuel pump: I replaced petcock 3 weeks ago (gas tank had rusty fuel in bottom - cleaned it out prior to new petcock); when I turn petcock arrow NOT to on or reserve, fuel comes out of line; when I turn it to on or reserve, fuel doesn't come out; puzzling
      -I don't know what's on back of fuel pump - it's a valve that has a hose coming out of it - looks like it goes to engine/carb - I haven't traced this out yet - what is it?
      -can squirt gas on air filter and engine will run for 2-3 seconds then stop - fuel in top of carb (under diaphragm) does same
      -it likely needs carb rebuild - will get to this - but something isn't allowing fuel to get from fuel pump to carb
      -I THINK it has a mikuni model x carb - diaphragm is ID 26mm  OD 68mm - hard to find inexpensive diaphragm, I guess because it's a model x
      -last thing - I replaced solenoid due to old one clicking; I HAVE to be charging the battery or it won't start/turn over - battery just goes dead; but if charging, it'll turn over nicely; i'm guessing it's a bad battery
      -any help appreciated - I've never owned an ATV before - inherited this beast from grandparent in-law
  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...