Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

toonces

Trying to identify this electrical connection

Recommended Posts

Just got this harness in today...

1_zpsbc7bmmze.jpg

It's pulls off 2 power wires from my 12v aux and I'm wondering exactly what would the top two connectors be called...

2_zps88xuphev.jpg

What would these connectors be called if I walked into my local Radio Shack and tried to describe it to the kid there?

Share this post


Link to post
Share on other sites


Those are called bullet connectors. Specifically water proof bullet connectors. They come in three sizes so be aware or take this with you to get the right size. It actually appears that the piece is in each one that you need. Hard to see in the picture. You could take a pair of needle nose and see if the pieces inside pull apart.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Spiq Eddy
      I just helped my brother order a replacement pull-start/recoil start assembly for his 83-89(not sure witch year) Suzuki quad.  It did not come with the part that sits inside between the engine starter shaft and recoil start assembly,  that mounts to the engine and has teeth that catch the recoil start to turn over the engine.  I can't remember what its called and can't look the part to order. 

    • By Devin Hazelwood
      I have a problem finding a wiring harness for this particular ATV. Does anyone know were I can get one or were I can get one that's from a different name but similar harnesses?
    • By w_r_e
      My scrap heap rescue '87 LT4WD has been running great until a couple days ago when the electric start started clicking instead of starting. Click is coming from the front so I got a new solenoid to try that (battery is showing 12.9 volts and is almost new so I doubt its battery). But like an idiot I pulled off the old wires without even noting what goes where.
      Now the battery cables I know, it lines up with the battery terminals. + on the right, ground on the  left if you're looking at the solenoid. But as for the the smaller wires that run to the starter switch, i have no clue. Help!
    • By bryanta0502
      Hi, im looking to increase the power of my 1995 king quad 300. I was wondering what other people are doing to increase the power of their quads. Are there any big bore kits, would putting bigger jets in the carb do much? Just wondering what I could do.
       
       
      Sent from my iPhone using Tapatalk
    • By Sturgeon
      Hello everyone, did a search and not successful. Purchased new 2017 Sportsman 570 sp and my power steering is not working. Seems to have a mind of it's own. Works then it doesn't. Dealer says there's not a fix. Thought it was just me and it being a brand new machine with 4 hours on it. Dealership said it's this model only ? Not sure what a person in this spot is suppose to do and wondering are your thoughts mite be. Thanks 
  • Similar Tagged Content

    • By patricknperkins
      Ok, so got this thing, assembled, and even added acid/assembled the battery with a solid trickle charge and the battery is fine.
      As far as I can tell, I have checked all the fuses I can find, but I have ZERO power to anything. Even the console will not light up when turned to ON.
      Is there some sort of hidden parental/child disconnect or safety switch that I'm not aware of? ANY help would be appreciated.
    • By biggreen2010
      ok it will start up an run but quits a lot till it gets warm, but has a bad miss an wont idle, I have a brand new Honda carb on it, good gas flow, new plug, but when I let the throttle go below a quarter, it backfires through carb an tail pipe:confused: so it has never had any electrical work or mechanical work done...it just started all the sudden, I'm think it may have ignition coil breaking down, or cdi box going bad...anyone had this trouble before? let me know what you did to fix it. thanks:skeptic:
    • By Flyman
      Good morning all I am new to the forum and new to the world of ATVs. I recently purchased a 99 big bear 350 4x4 that has a few issues to be resolved. it started with the push button starter it would just click when the button was pushed to date I have replaced the solenoid with a Napa 4 wire setup (not sure if this is installed correctly) and replaced the older baterry with a AGM battery. after all of that it still clicks but the source of the click is a white plastic rectangular box with 2 wires going into it. i have 12.8 volts to the first post of the solenoid and nothing on the second post when the button is pushed. when the solenoid is jumped the starter engages. lastly i have no lights when the buggy is not running and when i hit the light switch there is also a click that happens. Thanks for any info anyone can provide I greatly appreciate the help.
      Flyman
    • By Marlin18
      I have a polaris sportsman 500 efi ho 2008-09 model and I cannot get power to anything. The volts are good on my battery. If I take the ground off of the frame and screw it back on I can get power to the pod but when I try to crank it I lose power to everything. It has a new solenoid and a new starter. Anyone have any ideas?? If it helps give any ideas I drive through mud and water so it does get put through a lot.
    • By Merrixs
      I am looking for the service manual LIT-11616-BT-25. I know where I can buy one. I am more interested in a shared electronic version, or just some parts of the electrical section. I have a no spark situation and am trying to trouble shoot myself.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...