Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

X2Moto4

Moto4 engine swap

Recommended Posts

Hello. New here. Just picked up a used 350 motor out of a 1991 big bear. Going to put into my 1986 350 moto 4. From what I've read the engines are the same. The only difference so far I've notice is I have to change out transfer case. The moto 4 isn't 4x4. Has anyone done the same swap and any advice before I tackle it.

Edited by X2Moto4

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Dra O
      I likely just kissed $200 goodbye buying a Honda 250 this AM from Craiglist.  We'll see.
      - VIN number is off the front frame; one VIN site calls it a 2008 Honda 250 TRX - this baby ain't a 2008; other VIN sites list the VIN as invalid; might be that the owner (a shady dude from a shadier side of my home town) put a 2008 front end on it?  No idea.  
      - a HUGE hint (hint #1) would've been that there's no key to start the machine - gotta use a screwdriver.  I'll likely be visited by police sometime in the near future.
      - owner acquired from another man - owner showed me video of him riding it this summer on a major interstate while very drunk (hint #2) - the machine sounded good in the video
      - no front headlight; owner said machine has new carb - looks Chinese - he didn't have original carb; air intake box is wide open - no long plastic connection sleeve leading into air box like on my 99 king quad; no visible oil leaks; oil is dark; air filter clean; decent plastic; no front right brake apparatus; left brake handle very loose and rear brake doesn't work
      - battery at this point is good; manipulate the ignition switch w/ screw driver and the green neutral light shines (this has since stopped working)
      - it's a kick start machine: when I kicked it down (hint #3), the compression sounded normal, almost "tight"  but at the end of the cycle, there was some awful grinding noise coming from what sounded like either inside the engine or the starter area; I let it settle, kicked it again, same noise heard at the end of cycle; owner said it likely needs a new starter - I only hope it's this simple
      pictures attached - the throttle cable / zip tie pic is my favorite - but it works!  it was CRAZY dirty prior to pressure washing - and the water in air box is likely secondary to the power wash - no water was in it when purchased
      gotta few things to complete on the king quad - will be changing motor/gear oil in honda and getting new oil filter over time - talk soon - hope y'all had a great Christmas















    • By K L Buck Naff
      Trying to replace the carburetor on my 2003 Bear Tracker 250. Two brand new carbs in a row from different suppliers.   Both leak fuel out over flow and intake as soon as I turn the gas on. Any ideas. Am I doing something wrong?
    • By Hondasher
      I picked up a 1997 Yamaha Big Bear 350 2X4 a week or so back in non running condition, apparently they said it needed a new carburetor or a battery, I cleaned the carburetor thoroughly and got it running on idle and without choke now and it shifts into all the gears even into reverse. Aside from making me bounce a little when trying to start out with a bit of throttle the shock suffice to say needs work. Anyways I made a video of it running and would like your opinions on it, as to how it sounds while running. It seems like it has a little whine I'm not sure why that is maybe someone can tell me what it is. Anyways here is the video.
       
    • By Admin
      View File 1987 - 89 Yamaha Big Bear 350 Service Manual
      1987 - 89 Yamaha Big Bear 350 Service Manual
      Submitter Admin Submitted 12/13/2016 Category Yamaha ATV  
  • Similar Tagged Content

    • By weblex
      Problem: The ATV starts and runs at idle perfectly. But as soon as I open the throttle, the engine starts to slow down until it stops. On the attached video you can hear the sound of how it works: see video below
      Prehistory: there is a Polaris Sportsman 500 1998, which for about 1.5 years stood in repair, including also replacing CDI with one taken from the same ATV. Finally, the vehicles were on wheels, traveled several kilometers and overheated - forgot to fill the antifreeze Came back home in small moves. The next trip started well, but after 10 km there was a feeling of a small drop in power (even as the vehicle got warm completely) but still drives. Next trip - the situation is repeated. The next test of ATV through time and a huge loss of power from the very beginning. The engine sneezes, does not want to go more than 5 mph.

      What has been done: the carburetor has been replaced with a new one (inexpensive, $ 40), a new spark plug, a new ignition coil, the engine head has been removed, the piston is in good condition, valves were corrected - but the problem was definitely not in them.

      Ignition control unit is suspected. Who faced similar? Please help in solving the problem.
      Thanks in advance.
       
       
    • By JacobSlabach
      in this thread, I want to discuss how 4-cycle atv engines work- what the different types are...  how they are set up and which you prefer.  To start off, are the cams on ALL atv 4-strokes powered by a cam chain?  I know that on say a lawn mower or logsplitter engine, the cam is turned by the tappet, pushrods, and valve rockers.  Which is better and why?  Chain-driven cams or pushrod-driven cams?  Are the pushrods just an old version and everything is transforming to chains or the other way around...or not at all?  Just looking for some explanation, history, and downsides/upsides...
    • By mmgood
      Hey people
      Question for all, just picked a 1986 bayou 300 thinking of going synthetic any thoughts ?
    • By Arctic Snowdog
      Hi Guys,
      I have a small Sled Dog business and I train up to 14 Huskies pulling a Yamaha Grizzly 550, that is quite a lot of Horse (Dog) power. Sometimes in order to make the ride smoother for Dogs and us we ride in Neutral but on a few occasions I have noticed that the right hand (front) brake seems to loose pressure and does not brake at all. Is there a particular reason for this ? Is it a fault or is it something to do with us riding in neutral, I only use the ATV in this way a few months a year before the snow comes but I am sure I recall the same thing happening last season.
      Any ideas would be greatly appreciated because I am a far way from being a mechanic.....
      Have a super day and thank you all.
      Craig
      Lapland

    • By Wiktorix Gameplays
      Can I use an old snowblower engine in my 90cc quad? The old one blew up. 
      Thanks for the help. 
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...