Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

dboy910

1988 Big Bear 350 Reverse selecter

Recommended Posts

Ok new to group and new to quads. I picked up a 88 Big Bear for next to nothing but it has issues. The entire high low revers shifter has been removed. All I have is a bar attached to the linkage. I can shift into all three but I would like to replace or get suggestions. I have looked around but there is limited info or pictures on what I would need to buy or where it even mounts. Any pics of what where and how it works would be great. Or direct me to correct thread.

Thanks

Share this post


Link to post
Share on other sites


Try going to bike bandit .com and enter the quad u have. They will diagrams for every single system on the quad. They will also have part number and if you choose to pay that much for new parts u can order the part straight from them so you know u are getting the right thing. I normally like there to find the parts I need then buy the parts off eBay used.

Sent from my XT1585 using Tapatalk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By dirtybear00
      Hi guys I am new here. Not new to ATV s. I have a 2000 Yamaha big bear foot shift with no spark Looking for manual to down load any tips on where to find one or links be great thanks from Canada  
    • By Coyote251
      View File 2000 Yamaha Big Bear YFM400 Owners Manual
      This manual contains all information for owners of this vehicle including operational directions, safety and maintenance procedures
      Submitter Coyote251 Submitted 03/22/2018 Category Yamaha ATV  
    • By AFricks88
      It will not turn over with starter and will not fire while pulling pull start.
       
      The only thing that Ive tested that didnt test correct is the kill switch I read on another forum to test black and Black/white wire for continuity when in off position I did and it shows continuity like it should. Then when you slide it to run it should be open and show no continuity which mine still shows it while in the run position. So I unplugged the CDI just for sakes of doing it and the kill switch then tests correct. So where should I test next without unplugging CDI?
    • By Lellwyn Griffin
      I am looking for pictures of your carburetors, specifically looking for what type and where the hoses go on the red circles.
       
       
      Sent from my iPhone using Tapatalk
    • By Kelby 746
      I have a 1987-89 (not sure on the year) Kawasaki bayou 300 that has electrical issues, I have replaced the entire harness with a proven good/used one, new CDI box, and two brand new coils, problem is that it tests no charge at the pickup coil, so I replaced and tested again with a so called good one that had been salvaged out of a blown up 220/250 (not sure which, the left side cover is smaller than my 300) in Missouri. It has a proven good OEM stator. I am trying to avoid buying a new start and pickup coil because it is so expensive so if anyone has a suggestion please let me know.
  • Similar Tagged Content

    • By alexcross324
      Hi all, I try to find this manual in the threads but you have a lot of stock here
      Cannot find this particular manual.
      I found it for YFM200 but not sure if they are the same.
      Thanks if you could help me with that.
      Im new here so if I did something wrong, please tell me.
    • By alexcross324
      Hi all, my second post here
      I got an old Yamaha 88 moto 4 and I have a problem with my overflow hose from the carb.
      When I put the gas switch to ON a big amount of gas is leaking from the overflow...so I start using my quad with the gas switch to RESERVE wich is also leaking but less than in ON position.
      I dont ride a lot..but in a week I empty my gas tank.
      Strange.
      I never clean my carb because Im new to quad world and dont have the service manual...so I need you point of view.
      Thanks guys!
    • By mallen14
      Looking for anybody who can point me towards a free service manual for 1998 Big Bear 350. I found the sticky thread but all the links, from 2012, no longer work. If anybody has one please let me know. Thanks
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...