Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Ajmboy

The Silent Rider ATV Silencer

Recommended Posts

Not sure if I ever posted about this, but every Halloween I hook up my trailer to my ATV and make a hayride for my kids and our neighbor's kids. I've been using The Silent Rider atv silencer as a slip on over my HMF exhaust. It's not perfect put would quiet it down for a few hours while going out trick or treating. the exhaust however was flowing back so I added a snorkel sort off and wrapped the connections with 3M High Temperature Flue Tape which works very well quite frankly.  I pitched the muffler up and came up with this. Worked pretty good but for next year may just weld the connections instead of tape.

You can get the silencer on Amazon for @ $200 The tape is under $10.

 

Share this post


Link to post
Share on other sites


I have seen silencers advertised and from what the specs say, reduce the noise output by quite a bit. 

Ive never had a need for one but my exhaust is stock so it isn't loud.

 

Mike

 

Share this post


Link to post
Share on other sites

Yea I only use it once a year for when I take the kids on this hayride that I do. It's good though for hunters and if you need to keep noise down a bit, it quiets down significantly.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Asen_77
      Hi All,
      My name is Asen and I am from Eastern Europe, Bulgaria. Riding a Yamaha Raptor 700R and this is my first Quad wanted for a vey long time :)

       
    • By MarkinAR
      Can you believe this thing blew a new head gasket after a few weekend rides? Granted, it was beat on in a mud hole every weekend, but this is a new head gasket on a 400 Kodiak. Bummer. 

    • By JacobSlabach
      got 7 atvs off CL recently for a good price.  one of which is a yamaha warrior.  anyone know where the vin is printed on this bike?  Haha good place to start as I do not know year or size yet.  The former owner says needs exhaust ans and clutch work.  he said it ran fine until the clutch cable broke and then I couldn't get the new cable adjusted right and it would grind gears.  things I see:  clutch cable locked up again, no brakes, carb leaking (green with algae around the bowl and has gelled gas stalagtights on it), aftermarket exhaust melted the airbox so I need something different and a new air box.  I would like the use the current exhaust if I can but I have a feeling its a redneck fix as it looks like there is an ace bandage holding it to the exhaust pipe (its an aftermarket slip-on exhaust), so I'm not sure about that- lets get the bike running first.  also, battery (looks brand new, what a shame) is dead, 0 volts.  Otherwise, bike looks to have not been wrecked, and plastics are ok (it sat outside under a 'tarp' for 3+ years since it was run last).  any tips and advise on where to start first would be awesome as this is my first clutched bike (manual).
      the clutch is my main concern- I've never rode a clutched bike so I dont even know what its supposed to feel like.  lol I'm spoiled on my automatic polaris 
    • By MarkinAR
      Passing thought here and thought I'd pitch it to the group for debate.  I'm working through a Kodiak which is basically a Big Bear in a heavier bike and the same as about anything Japanese made for 30 years as far as clutch function and design goes.  This Kodiak is odd though in that the centrifugal clutch slipped a bit with good clutch material remaining and the main clutch pack seems to slip a bit as well at high RPM but also still has good clutch material left.  Much like the Kawa race bikes from what I've read.  Do you think it's an option to add a thin washer to the pressure bolts to put a bit more pressure on the main clutch and force it to use a bit more of the clutch material before having to replace?  There's seriously like 50% of fiber left on the main clutch pack and it seems silly to replace it all before it's truly worn down.
    • By marek porowski
      It’s kind of ATV related question as I need new trailer tires to tow my 4 wheeler. 
      Does anybody have any experience with loadstar 12” trailer tires ? 
      There is not to many choices for trailer tires here in Ontario and I was wandering if somebody can recommend me something. 
  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...