Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
By Dwight Williams
Ok, so I bought this scream of a deal the other day - a 94 King Quad 300 for $40.00. It's been sitting outside with no carburetor on it for about a year. Its rusty, missing some parts, wiring is all cut up and spliced etc. No seat, no racks but the plastic is all there minus the headlight housing. Anyway, who can pass up a $40.00 quad right? I get it home and looked at the sight glass for oil level, it's about 1/2 oil and 1/2 water. I drain it, refill it and turn the motor by hand (recoil starter is missing) and it turns over just fine. I worked on the wiring for about an hour and got it to turn over with the electric starter and got enough of it sorted out to get a spark. Did a quick compression test, 70 lbs. Wet test bumped it up to 90. Ok, so rings and cylinder washed out with water for a year, not too surprised. I thought 'what the hell' and sprayed some starting fluid in it and it ran for about 2 seconds - enough to show it's got life. Since then the compression has gotten worse, I can't get enough pressure to activate the carb diaphragm, therefore no fuel pump either. The compression is now around 60.
Anyway, my question is....is it worth it to try to get this thing going? I tore the top end down today and the cam and one of the rockers is pretty worn. I figured a top end job would be about $100 or so, depending on the condition of the cylinder but I'll probably have to put a cam and rockers in it as well. Doing some research on ebay I figure I'll have to spend about $500-$700 to make the whole machine right again. Much less just to make it run and use as-is but I won't really like it until it's right. I don't mind doing the work, I actually enjoy it but I'm concerned about what all that water did to the rest of the internals, I can't really test it all out until I can make it run.
I know it's a basket case but I'm not into it much at all, even if I do the top end and find something else wrong I'm still not out much. I'm leaning toward ordering the top end parts and going from there unless you can convince me otherwise - any way to check the rest of the internals without tearing it down? I plan on flushing the oil cooler before I do another oil change, I've drained it twice now and it gets milky almost immediately just turning the starter - I suspect the oil cooler is polluted badly.
I'll get some pictures today if anyone want to see them.
By Frank Angerano
Not sure how many of you will remember this or give a crap about it but back in 2016 I picked up my first old atv to rebuild. Yamaha bear tracker 250. I picked it up in NJ while I was out looking for a quad for my little guy since he started this atv thing after seeing a few old pictures of me in my hay day riding.
The person I was getting the 50cc quad had this one laying around and asked if I was interested in it. It was beat up and hadn’t ran in a few years. No spark the guy said and he left it to sit. I wound up taking both bikes.
I wish I had pics but I deleted the original post on Quadcrazy and lost the old ones on my phone when I upgraded.
This was the atv that caused me to stumble upon Quadcrazy since I needed a little help with the spark issue. So needless to say I fixed it, did some cosmetic work and she was good to go. I took it upstate and used the shit out of it for just about everything under the sun. This atv made it through some deep snow, mud etc. I decided to leave it up there and use it as a back up since it’s been about 50 atv’s later and I have newer machines now. But unfortunately it sat for some time and it’s a little beat up so I brought it back home and going to clean it up. Amazing how one year sitting has done so much damage.
This was the first atv that I owned in over 30 years! It’s the atv that brought me here to Quadcrazy where now I endlessly check the site to see what’s going on, who’s talking about what and who can we help with there problem or can help me with mine as well as the on slot of what I do today as a hobby with atv’s. It’s been a great pass time for me and my son with the projects we have gotten and get into. He’s learned how to ride so well it scares me a little watching him. He’s learned how to fix, maintain and upgrade atv’s. He’s insanely good with carburetors as well.
It’s a good thing when a kid wants to play in the garage over his X Box!!
The funny thing about this bike is that when we finished it we thought it was the best thing! We were missing a rack on the front and didn’t care since it looked ok, had no clue where to get parts or how to fix plastics. I was so new to this again since I was staring all over again and now had to remember things and also teach my son!
So we will be tearing into the bear tracker to get her up and running again as well as maybe a few new cosmetic changes and hang on to her for a while since I love this bike. The last two pics are the bike the day we finished putting it all back together and when it was upstate for the first week.
Had no intention of this post going so long. 🤷🏻♂️
1987 Suzuki LT 80 and 2007 Honda CRF 50 dirt bike stolen out of my driveway on July 4th. Anyone with info that recovers them will get $400 no questions asked.
The post Suzuki LT 80 Quad And Honda Dirt Bike appeared first on STOLEN 911.
View the full article
So yesterday I picked up a 07 polaris sportsman 800efi stealth edition for 3k. Will lead a pic ltr. In good shape. Here's what's wrong with it:
The rpm needle doesn't work just like my other sportsman... not too worried ab that.
The motor doesn't sound like it's running quite right and doesn't feel like it has much more power than my 500. I'm thinking it needs a tune up and some fresh oil.. but also it feels like it's running rich. It's a little buggy when you goose the throttle and sometimes farts when you let off (like I little backfire out the exhuast). I'm gonna check timing and valave clearence on the motor first but thinking of putting a tuner on it? Anybody got a suggestion? Mainly looking for more power.
Similar Tagged Content
these are what i have in my collection ... always looking for more
Linhai 250 - 360 Service Manual
Linhai 260 - 300 Parts Manual
Linhai 260 - 300 Service Manual
Linhai 300 Parts Manual
Linhai 260 Service Manual
Linhai Bighorn CUV Service Manual
By Zacharia Maisonneuve
i have a 1993 timberwolf yamaha and the compression is good and lights work but for some reason the electricity is not going to the spark plug(s)! i got a friend to check it out and they said its no use but im not giving up! please help with this!
By Connor Tuftin
I have a 1988 300 Honda FourTrax, All wheel drive.
My brother and I were fixing up this quad. We put a brand new battery and fuses in and it was running fine until we put the quad into reverse. As soon as it was put into reverse all of the electrical cut out and power wasn't making it to the head unit anymore and both of the brand new fuses popped. We figured there might have been a short from the starter or solenoids, but they are all working properly. At this point we don't know where to start looking for where the short could be. I'm just wondering if anybody has had the same issue or knows of similar issues that could cause these electrical shorts?
Recently Browsing 0 members
No registered users viewing this page.