Quantcast
Jump to content

First Quad...First Project


Recommended Posts

if your really looking for a deal on tires keep an eye on ebay for a set of razr or razr II take offs from a race team. i got a set of razr2 fronts on baja rims and razr rears on ITP 10" beadlocks for $191 (after shipping)off there with 75% tread and no holes!!! Racers post them at decent prices to and sometimes you can even find them with up to 90% tread left, i know some teams that dont put more than 2 races on a set then sell them for that fresh edge on the lugs. keep an eye out on there you never know what you might stumble across.. I would go with maxxis over the ITP holeshots, they have a lot more durable compund, and get awesome traction too!! Good luck, and great job on the silver bullet!!:yes: i'm going to take a nap now from getting caught up on this novel of a post..lol. take care!:bow:

Link to comment
Share on other sites

  • 2 weeks later...

wow.

just made a amazing discovery.

through this process. i have been secretly searching the internet for nerf bars that will fit on my bike. i see them on scrammys all the time. and wanted to know what would fit. WHAT MODEL NERF BAR WILL FIT ON MY TBLAZER!?!?! it drove me crazy!!

untill tonight!!

i found out surfing the net. that rappy and shee bars WILL FIT with MINOR modification.

i can get a set for 80$

the main question is. should i get the nerfs instead of the CDI and wait untill xmas to buy the CDI.

?

o yeah my parents havent ordered my stuff yet because of money troubles.

im SO leaning twords nerfs. i HATE floorboards. they send a jarring vibration up my legs.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By Uglyside38
      I have a 1988 Quadrunner 250 2wd. My brother in law sold it to my son for $20...had been sitting outside for several years. Got it home and had it running in about 30 mins. Ran it a bit and then went to looking at the carb as it was having trouble idling. Was getting it pretty close, then started losing spark...Also, it wouldn't start up every time...only about 1 in 5 tries. Anyway...now, it has what I can only describe as "intermittent" spark. I can get 1 light spark right when the start button is pressed and sometimes one when it's released...but none while cranking. 🤷‍♂️

      I have replaced the spark plug, ignition coil/wire, and traced wires best I can. I noticed a couple frayed wires at the pickup coil where it enters the case. So, now I have the cover off, stator and pickup coil out and trying to test the coil. I do have about 114 ohms resistance for pickup best I can tell. And I can read minute voltage when I drag a magnet across it. Could it still be bad? Can a bad ignition switch/button cause this? (I did have the switch off to oil the choke cable)...pulling rope makes no difference though...any ideas or help would be greatly appreciated!!! It's the intermittent part that's throwing me off! 

    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
    • By Mhatayas
      My uncle bought a Baja 250, 2006. Knew there was no spark since the get go. He don't know anything about quads so is getting me to help him try to get it running...
       
      battery is bad so I connected battery charger to it to crank it over , cranks over well , but no spark .... 
      Lights and everything work fine , but with each crank over using the e start switch , the display reads 999 888 777 666 ... Right down to 000 and repeats itself . 
       
      He managed to get a parts bike , I changed over the CDI and the coil and the stator from the parts bike and there was another black box by the voltage regulator I changed over ... I used my multimeter to confirm as much as I could works , it's hard without knowing which wires are which , and I cannot find any diagrams online for this bike ? 
       
      Do you think it could be the Killswitch? There's so many wires coming from there I don't know where to start . Also I should mention it appears the fan on the front of the bike has been taken off (the wires have been cut too ) 
       
      If this bike sparked it would run . The previous owner said he parked it one day and it just wouldn't start after.
    • By Gwbarm
      I have been exploring all the options available, so many, its hard to choose. I have kind of narrowed it down to the Honda Pilot, Subaru Outback, and Kind of looking at the Outlander, although its a little small,  the new one is nice looking. Just wondering if anyone has any recommendations or gripes with any of these rides. I have driven Jeeps for the past 25  years and they have been great, but their price point has gotten to high. Expieriences good or bad would be helpful. Thanks!



×
×
  • Create New...