Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

ticketman2u

2000 Polaris Sportsman 500 Issues

Recommended Posts

I am so glad that I found this site! I have a 2000 Sportsman 500 4X4 and have a couple issues.  The biggest one is that the gear selector mounting bolts to the frame have vibrated loose and I can't find the size that I need on any website.  I do not have any of the bottom bolts or the two side bolts to go off of.  The entire gear selector has come off the frame but is still connected to the shifter linkages.  Second issue is that it wants to turn left and is very hard to steer.  I cannot find anything bent.  Any ideas?

Thanks!

  • Like 1

Share this post


Link to post
Share on other sites




Left front caliper not releasing? Jack the front up and see if both tires spin with equal force.

Also, maybe something to do with the left cv axle.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By JacobSlabach
      So my parents have not let me get my license yet and I need to get around to gets parts and stuff.  Answer: Yamaha CW50 scooter.  This is a 2-cycle self-mixing scooter that so far, I am really surprised with the power output and speed.  It reaches about 45mph since the speedo has been disconnected and has plenty of power for two riders.  Its stupid looking, but with some work and a title and plate, it'll take me around town..  My issue is this:  No key.  I bought it for $150 from a friend and he bought it from someone for $100 who wired in a switch in place of the ignition.  That guy got it form his neighbor who's renter left it behind.  The scooter will run with this switch on or off (kill switch on handlebar kills engine)  To get it tiled and a plate so its road worthy, I need to get the ignition working either by a replacement key or a new ignition.  All wires are cut to the ignition and the switch turned on the power to the signal light switch.  Also, the 2-cycle oil was leaking out the carb, through the air filter and onto the scooter.  also, it runs great, but its making blue smoke with throttle and the muffler is wet with oil.

      (I have new signal lights for it btw)  So the issues I have with it summed up:
      No key (need new ignition) smokes burnt out headlight-  can I replace them with LEDs?
    • By Flipper Tiffany Roper Jones
      All I have been through everything. Bought brand new.
      Throttle safety switch 
      Cam and rockers
      ECM
      Carborator
      Stator
      Fuel safety switch 
      Battery
      Everything every forum has spoken of I've bought sealed airbox completely tight unplugged black wire on trans. I have literally done everything in the book.Checked oil today full of gas anyone no anything what might b wrong. Next I'm taking head off and making sure valves seat any ideas.
    • By Larry Fox
      Just bought this ATV. Wondering if my gauge from a 2003 will plug in and work. I know mine does not have a fuel gauge, but if the rest works, I am in. 
    • By Larry Fox
      Looking for the wiring diagram of the gauge cluster. Thinking about using it on my 2008 that I just bought.. Its gauge is destroyed
    • By james p
      Hey all new member so I'm sorry if this isn't the correct place to post, but I'm having trouble with a 2000 polaris magnum 500 I just acquired. The quad ran when I got it but was having problems that sounded like the camshaft, and sure enough camshaft lobe was pretty much gone, so we replaced the camshaft and exhaust rockers and now the quad doesnt have spark. We had the quad running right before we tore the old camshaft out and now no spark. Anybody else ever have a problem similar? We've been checking for loose wires, checked grounds, and double checked timing but cant get it figured out so any advice would be appreciated! Thanks 
  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...