Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Keith Broom

Yamaha 250 Bear Tracker No Spark

Recommended Posts

Power on turns over no spark. I replaced the coil, still no park . 

I replaced the cdi box no spark .

I replaced the stator and pickup .no spark. PLEASE TELL ME MY PROBLEM 

Share this post


Link to post
Share on other sites


What year is it? Have you tested all your points and verified that there is no spark at the plug itself?

Topic moved to Yamaha ATV forum and topic title changed to Yamaha 250 Bear Tracker No Spark 😎

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By MarkinAR
      Have any of you fine folks used coil spring spacers to lift an ATV? Ole 93 Kodiak could use a smidge more lift and they are cheap enough. Might ride rough but that's ok cuz the shocks are toast anyway. 
      Thoughts?
    • By Dwight Williams
      Hey everyone, I've been scratching my head over this for most of the day.  I bought a couple of Bayou 220's, got them running (they've both been sitting), and started tweaking and fixing small things.  One of them is mostly done, the other had an aftermarket carb on it and I've been trying to sort that out.
       
      Anyway, while adjusting the carb it died a few times, I restarted and moved on until it died and wouldn't restart.  I figured maybe I'd flooded it or something - after further attempts I realized I had no spark.  Since I have two identical machines I have many parts at my disposal.  I've swapped the CDI, spark plug and coil with no luck.  I have good resistance readings from the stator and pick up (135 and 110 respectively),  I don't have a peak voltage meter but I measure around 53VAC on the stator when cranking.  I have a 4 wire stator, not an alternator like the newer ones.  Grounds look good, I've checked the kill switch by verifying that it and the ignition switch grounds the black/yellow wire to the CDI.  I can turn the engine slowly and see the pickup short the meter as well, seems normal right?  So far everything I've checked looks the same on both machines.  I've got the service manual and wiring diagrams.  Do these readings make any sense?  I'm obviously missing something but I'm stumped.  thanks!
    • By Colby Calk
      I recently got a 98 warrior 350 that 'needed the carb adjusted' but the reality is it has no spark. I have a new spark plug, plug wire, ignition coil, battery, and cdi box. I checked continuity and took apart and inspected the starter/kill/light switch on the handle bar, and it all looks brand new and checked out. The key switch seems to be working properly, as when off, nothing works, but when switched on, lights and electric starter button work. It turns over fine, and as I just stated, all the lights work. I took all the plastics off and traced all the wires, and only one had a small cut in it, but it was only through the rubber sheathing, not the wire itself (the blue one coming from the stator). I cleaned some grounds, made sure both relays work, and still nothing. I pulled the stator cover and looked at the stator itself, and it looks great. No broken wires or connectors or anything. Still, no spark. I'm at a loss. Where do I go next? Any help is appreciated.
    • By Jay Reddick
      Hey guys, need some help with my 2016 Yamaha Kodiak 700 4x4.  Was riding and it started smoking below the air box and then Caught fire.  We got the fire put out quickly with a fire extinguisher.  Many of the wires below the air box got damaged.   I purchased a new wiring harness for the atv and replaced that as well as any other damaged cables or parts that burned up where the fire was.  I also replaced the regulator, the ECU, and the starter solenoid. I also replaced the stater since some of the cables that went to the regulator were damaged.  It acts like it will crank but it won’t turn over.   The fuel pump initialized when I turn the key so it’s working.  I’ve spend $1500 on parts and no luck yet.  Any suggestions?  
    • By John Brucato
      Hi all new to the sight haven a problem with my 1988 kawasaki bayou 220 it ran then just died when out one day get gas but no spark any info will help I'm new to the ATV got it used and ran like a champ but don't know where to start when it comes to this
  • Similar Tagged Content

    • By Bronson Weddle
      I have a 1999 250 Yamaha bear tracker was told it needed a coil to run got into it to day found out that the kill switch was wired together then I found were they put a new cdi on it they cut all the plugs off the stator wires and the cdi wires I found bits and pieces of wireing diagrams blue pick up wire to red and white green wire to white and green wire rolled it over Had a test light on the coil wire it showed there was juice going to it but no spark on the plug and the coil is a brand new one put it on before trying to test the spark did I miss something or have something hooked up wrong already have plans on a new cdi and stator and pick up coil before I go that far like to hear it run. Thank you for the help in advance 
    • By Stacy Hanks
      I have  2000 Yamaha bear tracker 250 - igniton relay and starter relay both were replaced also the neutral switch indicator was replaced-- bike will not show light on for neutral or start when button is pushed
       
    • By Patrick Canning
      So i have a yamaha bear tracker 250. Ice replaced the ignition coil, pickup coil, cdi box, spark plug, neutral safety switch and kill switch are good. Battery and ground are good. But still no spark. What now? Before i burn this thing down.
    • By Austin Phillips
      I have a yamaha beartracker 250 (yfm250) its not running right. starts fine mostly ...idles but if i give it gas it boggs out and dies before it even can carry its self ... I cleaned the carb ... put everything back and same issue. so i bought a new carb and intake boot.... replaced both things and still the issue persists.  So i have a new carb .... does the Air fuel mixture need to be set on the new carb? If so how do i do that? i ave looked everywhere for details on my bike and carb but cannot find anywhere that reads that the skrew needs to be adjusted out to  7 full turns or somthing to that effect..
       
      The bike ran fine until bad gas was put into it... i did remove and empty the gas tank. removed petcock cleaned and rebuilt that.....
      i also noticed that the new carb ....the bottom skrew for draining the bowl was closed all the way when i got it.. carb wouldnt get gas until i loosened it... now the bowl will drain ... i thought that that float stops this from happeneing....am i wrong?
       
       
       
    • By Steve1981
      View File 2001 Yamaha Bear Tracker Full Service Manual
      Figured I would share what I had. This really helped me out. Tinkering with my wife's atv now, so Looking for a 96 Polaris Xpress 300 service manual, preferably a free download.
      Submitter Steve1981 Submitted 09/29/2018 Category Yamaha ATV  
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...