Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

bcsman

1998 Honda Foreman 450ES, more info

Recommended Posts

I forgot to mention in my first post but it also came with a mid mount snow plow which I have removed for the time being.  I mainly bought to use as a work machine, plowing snow and hauling wood that I have cut from back in my 10 acre woods.  Maybe haul a mid range log or two also so this won't be for show or trail riding.  I might add a winch also for snow and wood hauling.

Edited by bcsman
added to title

Share this post


Link to post
Share on other sites


Hope you enjoy it,they are good dependable machines.Just some words of advice,dragging logs is very hard on a atv,especially a smaller one,hard on the clutch and drivetrain.A loaded trailer is easier on it.If you are thinking about adding a winch to lift the plow,you will run the battery down very fast,and put quite a strain on the stator.Just some food for thought.

Share this post


Link to post
Share on other sites

I wouldn't be pulling anything huge, I understand this is not a 4 wheel drive truck.  I mostly cut the wood to length back in the woods and wagon or trailer it up to my pile.  Sometimes there is wood not next to my trails that I can maybe pull to get closer.  As far as a winch unless I am using it it shouldn't drain the battery I would think.  If I'm using it to raise and lower the plow the ATV will be running so should be ok??  Maybe I'm wrong, not very versed in these vehicles...

Share this post


Link to post
Share on other sites

Depending on how much you plow,if other things are on(lights,etc).ATV charging systems are generally just big enough to charge battery,while lights are on,while being at a higher rpm.Every time you hit the winch button,the drain on the battery is more than what the atv starter draws.Some people do fine with a winch for the plow,but they generally have a battery tender,or float charger to plug in,after they are done,so atv will start next time.You may be fine,I was just warning you.You can also find atv plowing info on snowplow forums.Lots of businesses use them for driveways,now.

Share this post


Link to post
Share on other sites

One thing I discovered about this model there is a clock displayed in the dash that runs all the time and may help drain the battery if not run in awhile.  Wonder if there is any way to shut it off??

Share this post


Link to post
Share on other sites


First,call a Honda dealer,with your serial number,there was a recall for some models,I seem to remember.Yes, there is a power memory wire that could be cut and rewired to switched power,but,i think,you might loose trip mileage everytime unit is restarted.I think the drain is so small it would probably take 3 months or more to run battery down enough electric starter would not work.

Share this post


Link to post
Share on other sites

Thanks for the info, if the draw is that small I probably won't fiddle with it.  I should be running this at least a couple times a week if not more.  I don't anticipate it sitting for any length of time .

Share this post


Link to post
Share on other sites

LOL more than I run my rig,sometimes mine does not move for 2 months.But it does not have a digital clock.A note,if you buy a winch,the newer ones have a "sensing' or control wire,to be switched on and off by the key,follow the directions,there are all kinds of stories out there that people wired that wire directly to battery(because it is easy) and their batteries would go dead in 2-3 days.

Share this post


Link to post
Share on other sites

I took my rig down to a neighbors today to show him and we were talking about winches.  He said the problem he has run into with plowing is your plow will float sometimes depending what you run over.  Then it puts slack in the winch cable and can bunch and pinch.  Everything has good and bad points so have to pick your poison.

Share this post


Link to post
Share on other sites

I put 26 miles on my 13 rancher plowing the first year I got and had now problems with it. I even managed to get the 4 wheeler out after a 24 to 30 inch snow storm and plow. My family's big plows were having a hard time with  the snow but my little honda managed I just took my time. I had the last laugh after the storm.

Edited by colin james

Share this post


Link to post
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Forum Topics

    • By JacobSlabach
      in this thread, I want to discuss how 4-cycle atv engines work- what the different types are...  how they are set up and which you prefer.  To start off, are the cams on ALL atv 4-strokes powered by a cam chain?  I know that on say a lawn mower or logsplitter engine, the cam is turned by the tappet, pushrods, and valve rockers.  Which is better and why?  Chain-driven cams or pushrod-driven cams?  Are the pushrods just an old version and everything is transforming to chains or the other way around...or not at all?  Just looking for some explanation, history, and downsides/upsides...
    • By Gunny
      I was able to get out for some tracking in-between storms ... we have lots of deep powder and on this ride, it was pretty windy ... of course, it usually is on these ridge tops. It was nice & cool too. The day started of at -7F (-21c) and stayed pretty nippy all day long.
      Hope you enjoy the video !!!
       
       
       
    • By Snowbound
      Just a curious thought-what percentage of your quad use is work (yard, field, hauling, etc) vs playing (exploration, recreation, enjoyment) 
      personally mine is about 60/40 work to play.  Most of the work is winter plowing!
    • By Ajmboy
      One of my good friends just added this 2018 Textron Wildcat XX to his garage. He already has an RZR and a few quads but said he only wants to ride this thing now because it’s that awesome. I’m still waiting to find some time and go out with him and hit the trails. Here’s some pics..



       
    • By bradleyheathhays
      '11 Grizz 700 here.  Since I've got some warm weather these next couple days I've decided to start the bike after about a year of just sitting.  Took out the plug and sprayed a good amount of fogging oil on top of the piston to help lubricate things.  After about a minute of letting it soak I stuck my air line tubing in to suck out the excess, but it seems like I didn't get nearly as much in return.  Repositioned the tube enough so that everything that was gonna come out pretty much did.  I'll probably shoot some compressed air down the plug hole before doing the start just to make sure it's all out, as well as cranking it for a second before putting the plug back in.   How long would it take for a bit of standing fogging oil to seep past the piston rings, and where would it go?  I guess into the engine oil?  The oil was fairly new the last time it was started but I'm sure it could stand to be changed after sitting for so long.  If much of this fogging oil got into the engine oil should I do the change before the startup?
  • Recently Browsing   0 members

    No registered users viewing this page.


×