Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

bcsman

1998 Honda Foreman 450ES Fuel drip

Recommended Posts

Noticed fuel is dripping from the primer button on the carb.  It seems to work as is spring loaded and pushes in and releases.  Is there a gasket or something I can replace?  It should quit if I shut the fuel off with the switch...looks like it did. 

Share this post


Link to post
Share on other sites


Yes thanks, I did check and found like items that you posted.  Doesn't look like much to change, think I can even do it..lol

Share this post


Link to post
Share on other sites

Easy fix.The Honda kit has more parts,that you really do not need,and costs 55 bucks or more.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By JacobSlabach
      picked up this pos bike for $80 not running.  took it home, cleaned the carb and bypassed the fuse-  ran great (other than the rev limiter- those things are so stupid)  Then one day out of the blue it starts flooding on cold startup and wont idle cold, but idles to fast warm.  (too fast being about half throttle speed heh).  I tried a new carb ($10) and new sp.  new carb wouldnt make it run except on choke and then it was gushing white smoke.  I had better things to do with my time so I parked it in a shed and used it for a work bench for a while...  this last weekend, I wanted to take it along with the sportman to a mens retreat to let the younger boys have some fun on it--  took about 30mins to pull all the crap I had accumulated on it and then rolled it down to my workshop, put the old carb back on after adjusting the needle clip up two notches (leaner) and threw it back on the bike.  Will turn over, but no fire.  I didnt have time to check sp that day but just wanted some incite on what could be wrong with this quad (if it even qualifies as being called that)
    • By Wolds Alpacas
      Hello all.  I have just stripped down the carb on my YFM225 as it is not running right.
      I put it in the ultrasonic cleaner for half an hour and it has done a good job.
      Nice clean jets but when I go full throttle it backfires, and there is a lack of power.
      It also does not seem to take fuel in properly - it comes out the petcock ok so it is running freely enough, but it is not drawing into the carb.
      If anyone has any ideas I would be very grateful.
       
    • By KQ300cy
      Hi all, new to the forum, looking forward to getting some help/advice on maintaining an 18 yr old atv!  So my King Quad 300, recently started running really rough (otherwise ok til this point) at anything more than idle.  After started, choke on/off, doesn't seem to matter, it shutters (Not sure how else to explain it) really bad when given throttle.  I can let the engine run for several minutes, but this never improves.  
      Fuel pump checks out ok, and I don't see any gas in the fuel pump vacuum line.  I am a novice on a carburetor, but I need to see what's going on, so after taking it apart, I have a question about this plastic part with an o-ring that is above the jet needle.  Appears as if someone rebuilt this carb, because it is extremely clean...so I am wondering if this plastic part looks to be typical for this carb...or not.  Thanks in advance for the help!



    • By Thunt56
      How do I replace the pinion clutch shaft in a 1987 Suzuki LT230 quadrunner? It starts up on the first kick but when I put it in gear it wants to kick up. I can give it gas and put it in gear but my clutch lever isn’t doing anything. SOS
    • By Kris Weix
      Went to start my 2012 arctic cat 550 today and it will not turn on the fuel pump or crank starter it has a good battery in it can anyone help 
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...