Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

colin james

1999 Polaris 500 Diesel Service Manual

Recommended Posts



Thanks for posting this. I have a 1999 motor I bought a while back by mistake... And someone just gave me a 2009 500 that has a engine that has some issues.  So far I've pulled that one out and I'm working on putting the diesel back in as soon as I hear it run (it does turn over, but I've never heard it run).  All the mounts are the same, the clutch will fit, same with oil/coolant lines.

  Anyone here have one of these? If so, please PM me. 

Share this post


Link to post
Share on other sites

Ten post required to download, and then its in sections and you can only download so many a day (took me two days).

  I have my 1999 motor on a 2009  frame now.  I does great, some clearances were close.  Had to move the mount locations a little, move the front two mid support rails forward a little.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Steve Howard
      Ran find shut down the quad next day would start and idle when you try to accelerate it would start popping through the carb got a rebuild kit soaked it in chem clean after break down for 12 hours on slow vibrate reassembled and adjusted per manual still the same thing any help would be really appreciated thanks and happy ridding  
    • By Coyote251
      View File 2000 Yamaha Big Bear YFM400 Owners Manual
      This manual contains all information for owners of this vehicle including operational directions, safety and maintenance procedures
      Submitter Coyote251 Submitted 03/22/2018 Category Yamaha ATV  
    • By Lellwyn Griffin
      I am looking for pictures of your carburetors, specifically looking for what type and where the hoses go on the red circles.
       
       
      Sent from my iPhone using Tapatalk
    • By Travis Mitchel
      Hello all just recently acquired this atv which as you can see in the pics that it has had an unsheltered life. i did get it running and put some used tires on the front.
      It still needs a bit more well needed maintenance, chains tightened and oiled. needs an airbox or air cleaner and other misc items.


    • By Charlie Garcia
      Bought for cheap a few years ago and had it restored 


  • Similar Tagged Content

    • By mrfartsalot
      i have a 2001 suzuki quadmaster 500 4x4 that the primary cvt clutch is rusted on any ideas on how to get it off i want to try to reuse it if possible.
    • By Paul Maple
      I have a 1999 Sportsman  500, it was running fine, than started to lose power in the winter, I adjusted the idle screw and away I went, than a few weeks ago it died, I have found that i am flooding the engine, compression was at 70PSI and due to the compression release mech. i assume i am good as it compared to the same PSI on a 2000 sportsman 500 i have. i cannot start the atv unless i go full throttle and it starts an runs for about 30 sec than dies, again it is flooded. i ordered a new carb off ebay as i could get one for around $40. put that in same issue, i have checked the timing, (good), valves out of adjustment i adjusted to .006 still same issue, i have found the exhaust lobe and rocker arm to have some wear, i have ordered new ones, but am looking for any other input in this area as well. would the exhaust cam and rocker arm cause the engine to flood? i have used a bore scope and the piston liner has good cross hatching still? any input would be great.
    • By colin james
      View File 1996-2000 Polaris Sportsman 335/500 Service Manual
      This is the factory service manual for the polaris sportsman 335 & 500.
      You can download the section you need  or download all of the chapters for the complete manual 
      Submitter colin james Submitted 10/19/2018 Category Polaris ATV  
    • By colin james
      This is the factory service manual for the polaris sportsman 335 & 500.
      You can download the section you need  or download all of the chapters for the complete manual 
    • By colin james
      This is the factory service manual for the sportsman 500 6x6.
      Download just the chapters you need or can download all chapters to have complete service manual. 
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...