Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

mtn_2

anyone ever try to ungovern or modify a suzuki lt50 quadmaster

Recommended Posts

I bought my kid a 03 suzuki quadmaster lt50 some years back and is bored with it cuz it has no balls. It has a 2-stroke 50cc motor in it and i know it has to be baffled down somehow to accomodate little kids. My question is has anyone on here tried to unbaffle or modify one of these to get its full potential? If so, Was it worth doing? 

Share this post


Link to post
Share on other sites


The restrictor plate is between the carb and the cylinder. It is part of the cylinder its self. If you,pull the car you can't miss it. Rejetting the carb is a must if you decide to get rid of it. I believe a 65 main jet is what was put in. I have also seen it taken out in steps to add a little more speed as the kids got better at riding. The little motors can really move if do right. 

Share this post


Link to post
Share on other sites

so this plate needs to be cut out? what is it made of?  What would be the outcome if i dont re-jet the carb? Is there any exhaust restriction that could be removed as well? Thank You guys so much for your help.

Maybe i wont have to buy a bigger one right yet after all!

Again, Thank You

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By paul d
      hello everyone , i bought a suzuki 500 quadmaster 2 years ago , it wasent running , the guy said he an his dad broke the choke cable attempting to take carb apart so he just put it in the shed , i got it an rebuilt the carb put new choke cable , battery , spark plug , petcock , air filter , changed oil , after some adjustments got it running like a new one , at the end of spring this year i got on it to go for a ride , after about 2 minutes it stalled running real rough an backfirering , an woulnt move , but at idle it runs fine , so i put a new carb on it , same thing runs fine for about a minute then sputters an backfires , i took the new carb back off an cleaned an put the factory carb back on , i check the petcock , it was brand new an i cleaned the tank thougholy when i put it in , everything still looked fine , checked the air filter , it still looked fine, also checked the sparkplug , back in may i took everything apart ,"again" cleaned it put it back together , didnt put any gas back in it an gave up on it , just recently my grandson wanted to look at it so i put some gas in it , it fired right up but same thing after a minute sputters an backfire , i'm at my wits end , i posted my problem on here before an tried everything i got in the responses , any help would be so greatly appreciated, thank you for your time in reading this rediculously long post
    • By Ryan Geiler
      New to the ATV world, picked up a solid used Kodiak 400.  It appears the former owner did some sort of modification for a saddle bag or something along those lines--and I'd like to match it up and replace it.  Not a big deal by any means but something I thought I would give a shot at finding.
      does anyone recognize what kind of luggage/bag/cargo would go where those white tabs are he drilled through that fuel fender?
       
      Thanks again

    • By Walter Awe
      I HAVE a 2002 big bear 400 4x4. I have two wires atacking to the front of the carb. What are they for?
    • By Steve Howard
      Ran find shut down the quad next day would start and idle when you try to accelerate it would start popping through the carb got a rebuild kit soaked it in chem clean after break down for 12 hours on slow vibrate reassembled and adjusted per manual still the same thing any help would be really appreciated thanks and happy ridding  
    • By MarkinAR
      Let me start with I have about 30 years of ATC experience, but not much with stuff made after 1988.  Some, but I'm mechanically inclined so it's all good.  I"m rehabbing a 1997 Bayou 220 to send back into the wild and the mechanicals are now all good, just working on making the electrical system...electric.  Right now, I have no power on the white wire as tested directly on the plug at the starter solenoid.  I'm assuming that wire is supposed to be hot any time it's attached to a battery?  The genius that had it before snipped a couple wires and inserted a fairly heavy push button for electric start bypassing the electrical system. I think i've corrected everything north of the solenoid but the white wire has me stumped.  Is my assumption that this should always be hot with a hot battery correct?  Does this indicate a broken circuit in the starter solenoid?  Relay was also bad and wired incorrectly, but that's resolved and I can make the relay click bypassing the solenoid and connector, directly giving the white wire 12V.  Thoughts?
  • Similar Tagged Content

    • By Mr.et
      I am having trouble with the quad it has a aftermarket China carburetor it starts and runs for about 10 minutes then dies out it will start but you have to keep playing with the chock but can't seem to keep it to stay on no more then a few seconds. What are the correct jet and piolet jet size? Any help please..
    • By mk1mad
      Thanks in advance for any advice given!
      My 4 year old has been driving his lt50 with his hand on the brake & burnt out them out.....can anyone point me in the right direction to get a shop manual for it or even just advise how to get into the drum to replace the shoes?
      Cheers!!
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...