Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

BigSkyKingQuad

Mid 90's Suzuki King Quad Need Info and Exact Year

Recommended Posts

Hello Everyone.

I was just given a mid 90's King Quad. I got her running today. I have so many questions. I'm Tony from Florence Montana. It runs excellent. I want to change fluids and have some fender work to do. Anyone here have some info on finding out exactly what year, what manual to get, etc? Thanks in Advance. Thank you all for this Forum! 

20180923_160452.jpg

Share this post


Link to post
Share on other sites


@BigSkyKingQuad Welcome to QUADCRAZY! I broke out your reply to the new member topic and created this new topic for you so any replies to your questions are separate from the topic started by someone else 😁

Can you take a look on the frame and see if you see a VIN number stamped somewhere? It might also be on a small metal plate maybe left rear area of the ATV. If you find the VIN number, you'll easily identify what year this king quad is.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Dra O
      posted a while back - it was running at one point - I have all the plastic shroud off - it's down to frame and engine now
      -fuel pump: when line from petcock is attached, no fuel comes out other side to carb; the line to the carb is open (can blow through it); I thought when I cranked engine that the pump would spit out fuel on other side but it does not; I removed fuel pump and opened it up - diaphragm looks good - but internal areas had lotsa calcification build up - I cleaned this out and dried it good - the clear plastic pieces (?diaphragms) aren't broken - the spring w/ steel ball on end moves freely; am putting it back on tomorrow; but can anyone answer about the pump? isn't it supposed to pump fuel through it... to other side... to carb? puzzling
      -along with fuel pump: I replaced petcock 3 weeks ago (gas tank had rusty fuel in bottom - cleaned it out prior to new petcock); when I turn petcock arrow NOT to on or reserve, fuel comes out of line; when I turn it to on or reserve, fuel doesn't come out; puzzling
      -I don't know what's on back of fuel pump - it's a valve that has a hose coming out of it - looks like it goes to engine/carb - I haven't traced this out yet - what is it?
      -can squirt gas on air filter and engine will run for 2-3 seconds then stop - fuel in top of carb (under diaphragm) does same
      -it likely needs carb rebuild - will get to this - but something isn't allowing fuel to get from fuel pump to carb
      -I THINK it has a mikuni model x carb - diaphragm is ID 26mm  OD 68mm - hard to find inexpensive diaphragm, I guess because it's a model x
      -last thing - I replaced solenoid due to old one clicking; I HAVE to be charging the battery or it won't start/turn over - battery just goes dead; but if charging, it'll turn over nicely; i'm guessing it's a bad battery
      -any help appreciated - I've never owned an ATV before - inherited this beast from grandparent in-law
    • By Dwight Williams
      Ok, so I bought a 2006 bayou 250 for 200 bucks, kid couldn't start it and had no idea why it wouldn't run, I pulled the rope and felt what I thought was valve to piston contact, he wanted 500 and I talked him down to 200 and brought it home.  Sure enough, timing was way far out, timing chain incredibly loose.  So for fun I re-tensioned the timing chain and re timed it, got about 120lbs of compression, pretty low.  I cannot get the chain very tight but the the tensioner seems to work fine, the chain guides don't look very worn.  Also, when I took the head off the valves don't look bent and the piston has no discernible marks on it.  Is this an interference engine?  I sure thought I felt some contact with the pull rope but maybe no permanent damage was done?  Anyway, I plan on doing a full top end job as well as timing chain tensioners and hopefully that'll cure it.  Is there any reason other than chain stretch (I measured it and it's ok) or guide wear that would cause the chain to be so loose?  Thanks!
       
    • By pcumby
      Hi guys I'm in the market for a new ATV.  I narrowed my choices down to King quad 750 Grizzly 700 and Rubicon 520,  I own a 2006 500 Rubicon right now and I like the reliability and power for plowing.  However it is not a capable ATV.  When quading with other guys it falls short with ride quality and ground clearance.   I also have a 500 King Quad 2015 which I like and will keep it for my wife.  It is very strong and reliable also.  However my plan is to sell my Honda Rubicon and replace it with a 2020 of one of the these mentioned above.  Can anyone give me their take on one or all of these machines and why you picked what you picked?
    • By Reece Bowen
      x   just bought this expedition 425 and the Speedo needle does not work. The lights work for the shift indcator. So is this an electronic Speedo or cable? Is there a way to fix it or will I have to replace the unit? Thanks for any help you can provide.
    • By DUBLT
      Looking to purchase a windshield for my ATV, suggestions of what to buy with quality in mind and will fit without doing any modifications. 
  • Similar Tagged Content

    • By DUBLT
      Looking to purchase a windshield for my ATV, suggestions of what to buy with quality in mind and will fit without doing any modifications. 
    • By Ted Aregi
      I've got a king quad 750cc has anyone converted the fuel pump relay to a stronger fuel pump relay on there king quad?
    • By Brandon Bollinger
      Doesnt seem to make the sound all the time. Mostly does it under load or going up an incline. Its kind of like a clunk and or grinding noise, Kind of hard to decipher. Today while going up an incline it actually stopped and it sounds like something spinning and then it ingauged again and it would move. I checked the clutches and installed a new belt before it did that also. Rear drive shaft seems ok where U joint is too. Has all new rear CV shafts and bearings and al new bushings in rear arms. Also flushed out the rear Diff with no shavings. Any ideas or where to check. 
    • By Jeremy Murray
      My 300 king quad will crank and crank off the start button but will not start but you can pull the pull rope a few times and it will start help me
    • By My kiwi shed
      Hi there everyone. Just seeing if there is advice on a problem I have before I start digging too deep. 
      I recently bought this creally nice 2004 King quad ltf300 with only 2400km..
      Everything things works great except when engaged into 4wd or diff lock it has a clicking noise ( sounds like broken teeth etc) are the front diffs known to blow?  Or the transfer from engine?
      I am yet to test on some loose ground to see if I'm getting drive at front .
      I will be driving in to find problem in next few weeks but thought I'd see if anyone might know what it is first. Cheers


  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...