Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Hasten Haynes

2003 Yamaha Wolverine 350 bogging

Recommended Posts

Idles fine but 3/4 throttle through 2nd gear the atv Boggs and backfires. I’ve replaced carburetor, air filter, spark plug, carburetor boots. Any ideas?

Share this post


Link to post
Share on other sites


The atv ran fine but I let it sit for a season with gas in the tank so in the previous carburetor it had trash in the carb. So I cleaned it and popped it back on and it was doing the same thing as it is doing now but worse. So I put a new carb on and cleaned the tank and put fresh gas in it. 

Share this post


Link to post
Share on other sites
On 10/2/2018 at 8:42 PM, rdlsz24 said:

Did it used to run fine? If so, what was done around that time? Fresh gas?

Rob

The atv ran fine but I let it sit for a season with gas in the tank so in the previous carburetor it had trash in the carb. So I cleaned it and popped it back on and it was doing the same thing as it is doing now but worse. So I put a new carb on and cleaned the tank and put fresh gas in it. 

Share this post


Link to post
Share on other sites

I see you cleaned the tank did you also clean the gas valve at the bottom of the tank ? 

And also make sure the vent at the top of the tank on the gas cap is not blocked. It seems like it’s statving for fuel. What is the air/fuel mixture screw set at ? And has anyone messed around with the main jet needle setting on the carb slide ? 

Share this post


Link to post
Share on other sites


11 hours ago, Frank Angerano said:

I see you cleaned the tank did you also clean the gas valve at the bottom of the tank ? 

And also make sure the vent at the top of the tank on the gas cap is not blocked. It seems like it’s statving for fuel. What is the air/fuel mixture screw set at ? And has anyone messed around with the main jet needle setting on the carb slide ? 

Top of fuel top of fuel tank is clear. Have not cleaned the valve. The screw is set at OEM 2.5 out I’ve played with the main jet setting but it is now back at the middle setting. 

Share this post


Link to post
Share on other sites

Don’t be afraid to try and move the clip in all spots and try to see how it operates.  

Also is the float free from any hang ups? 

 

If you are confident that the carb is cleaned, properly reassembled and all good with the fuel delivery then you may have to see if the ignition is breaking down as the engine revs highter.  

Is there a rev limiter on that bike ? 

  • Like 1

Share this post


Link to post
Share on other sites

I was going to say the same thing as @Frank Angerano check the float, almost sounds like it's fuel starved on 3/4 throttle. Sometimes the pins hang up although you mentioned its a new car, so it shouldn't. 

  • Like 1

Share this post


Link to post
Share on other sites
On 10/5/2018 at 3:46 PM, Frank Angerano said:

Don’t be afraid to try and move the clip in all spots and try to see how it operates.  

Also is the float free from any hang ups? 

 

If you are confident that the carb is cleaned, properly reassembled and all good with the fuel delivery then you may have to see if the ignition is breaking down as the engine revs highter.  

Is there a rev limiter on that bike ? 

The rev limiter has been disabled

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Eddie Rahm
      whats up fellas....the white wire going from the throttle body came unplugged from the circuit  board and im not sure where it plugs back in to ? i see where the red wire goes but im not sure where the white wire goes...im not even sure what those wires do..any help would be appreciated..thanks. 1996 polaris sportsman 500 4x4 push button awd.
    • By Chris2018
      I have a 1996 Kawasaki Mojave KSF250. I have no manual on it and it has a no spark issue. If anyone could give me a hand with this or would possibly have a manual would appreciate it. 
    • By Richard Paradise
      My 1997 Beg Bear got stuck in 2nd Gear when parked on slight hill, otherwise in perfect shape. Trying to get it into neutral, by rocking it back and forth won't release out of gear.
      Any suggestions, It's my work horse and I keep it in to shape, got to get it running..
    • By Diana Donner
      I am struggling to find boots that will fit my large calves. I'm not a large person just muscular calves. I wear a women's size 7 but have tried on up to my boyfriend's size 10. Surely there is something out there.... I can't be the only person struggling
    • By Tiffany Rowland
      I recently purchased an 07 Honda sportrax and when I was checking the spark plug I saw the boot was ripped nearly in half. When I removed the plug it was blackened and covered in oil. How can I thoroughly clean the plug hole and remove any debris that is in there? Is there a small tube like vacuum or something of the sort made for stuff like this? The machine my dentist has would be perfect, maybe they do rentals! 😁

  • Similar Tagged Content

    • By Gerry Davidson
      Can anyone help me , I did the rear brake pads and rotor but cant find the brake fluid reservoir.   The front in rite there but cant find the back . 
    • By Robert Ochoa
      Don't worry about hauling the ATVs. We have the helmets, goggles, and gloves covered too. Our equipment is well maintained and gassed up ready to go!
      We take the work out of your fun!
      Book your next adventure now!
      www.awesomeatvrentals.com
      https://www.instagram.com/we_are_atvs/
      https://www.youtube.com/channel/UCWTAk9BABQNion2JJ_TfQXA
      we_are_atvs
      #fourwheeler #atvlife #atvriding #atv #4wheeling #fourwheeling #mudding #outdooradventure #atvs #mudlife #powersports #northcarolina #southcarolina #southcarolinalife #offroading #AwesomeATVRentals #yamaha
    • By ezduzit
      I have a problem here, she starts and only runs for about a minute on her own fuel. her idle is high then boggs down. Then she seems to have
      a light backfire then dies. Any ideas what to look for are appreciated. Ive already gone through the carbs.
    • By oxidized_black
      View File 2003-2006 Yamaha Wolverine YFM450 Service Manual
      2003-2006 Yamaha Wolverine YFM450 Service Manual
      Submitter oxidized_black Submitted 12/15/2016 Category Yamaha ATV  
    • By oxidized_black
      2003-2006 Yamaha Wolverine YFM450 Service Manual
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...