Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

basmn

Yamaha Kodiak 450 YFM450FAR Service Manual

Recommended Posts



What model yrs. does this manual apply to? I have a 2018. This manual shows a carburetor where mine is Fuel injected.

Share this post


Link to post
Share on other sites


7 hours ago, mothrottle said:

What model yrs. does this manual apply to? I have a 2018. This manual shows a carburetor where mine is Fuel injected.

Should be a 2003

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Asen_77
      Hi All,
      My name is Asen and I am from Eastern Europe, Bulgaria. Riding a Yamaha Raptor 700R and this is my first Quad wanted for a vey long time :)

       
    • By Cj Winds
      I have a 2005 Yamaha Kodiak 400 Automatic. It has an oil leak inside clutch cover. The middle gear has two oil seals, the front seal is leaking engine oil into clutch area. How do you change the leaking seal?
    • By stymy68
      Hello All,
      I have multiple Yamaha Timberwolfs, and I'm rebuilding a 92. I would like to replace the Ball Joints on the control arms. Does anyone know where I can purchase them? I don't want to purchase entire control arm. Ebay only has upper ball joints (Funny I don't see Upper Ball Joints, I have struts) and Cheap Cycle Parts, Partzilla and others don't even show the part number for the lower ball joint. There has to be something out there, these are just pressed in ball joints with castle nut and cotter pin.
      Please help cross reference. I have another Timberwolf I want to rebuild.
    • By John Victor
      My father-in-law gave my boy a 1999 350 Big Bear. It's been sitting in a barn for a bunch of years. It runs great! My boy has been riding a couple weeks now and it has developed a squeal coming from the front end when you get off the gas at speed. No noise during acceleration. At first I thought brakes. I took it for a ride and I don't think it is the brakes. I feel it is the front prop shaft U-joints, front differential or one/both axles. I pulled the fill plug on the differential and I can't find anywhere how much gear oil should be in there. My gut says up to the fill opening. It doesn't have a manual. It's wet in there, just don't see any gear oil.

      #1 Should I fill the differential with gear oil up to the fill opening?

      #2 How do I check or know if the u-joints are bad? That looks like a "Big Bear" of a job if they don't need to be replaced.

      #3 What else could it be? I don't think it is the front bearings. I jacked the front wheels off ground and no play in the right wheel. Very little play in the left wheel, looks like the lower control bushing is where that play is coming from. The rubber CV boots look original but all still intact. Wheels spin easily without any noise.

      Thanks for any help!
  • Similar Tagged Content

    • By Milsparro
      Howdy y'all. Just bought myself a 2004? Yamaha 400 with electrical Gremlins aplenty. Runs good (after jumping the starter solenoid relay terminals with the helpfully included with the sale pliers) but no fan when my wife's 03 Kodiak 400 had fan and the starter button makes it to the starter solenoid but the ECU side isn't happy. This seems to be a lively forum with manual downloads being supported so hi.
      Oh yah, and you can get two Kodiak 400s on a 5x8 trailer... I bought a nice 14' trailer as soon as possible after this.

    • By Jay Reddick
      Hey guys, need some help with my 2016 Yamaha Kodiak 700 4x4.  Was riding and it started smoking below the air box and then Caught fire.  We got the fire put out quickly with a fire extinguisher.  Many of the wires below the air box got damaged.   I purchased a new wiring harness for the atv and replaced that as well as any other damaged cables or parts that burned up where the fire was.  I also replaced the regulator, the ECU, and the starter solenoid. I also replaced the stater since some of the cables that went to the regulator were damaged.  It acts like it will crank but it won’t turn over.   The fuel pump initialized when I turn the key so it’s working.  I’ve spend $1500 on parts and no luck yet.  Any suggestions?  
    • By Guy Churchward
      I have a 2016 Yamaha Kodiak and find myself with a start issue.. I changed the battery so it’s not that.. here’s a video of me trying and then boost starting.. can anyone give me pointers as to a starter motor issue or fuse or wiring or whatever ?.. I find myself without a vehicle with a tow hitch for the 1st time in years so have a dead and stranded ATV to fix !
      thanks in advance, suggestions welcome
      Guy

      IMG_5952.mp4  
       
    • By mothrottle
      The VIN on my 2018 Kodiak 450 is not where it's supposed to be. I bought this used. Is there another "hidden" location where I can find it? Need the number for insurance co. Thanks in advance.
    • By Michael Aiken
      Where can I find a wiring diagram for my 2005 450 Kodiak. Thanks.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...