Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Karen

Yamaha BRUIN 350 Water in tank?

Recommended Posts

Yamaha BRUIN 350 Quad

Hi, think water got into the tank, have managed to drain fuel (not the best experience) and empty the carb of fuel ........ so it starts now and runs however, it cuts out on fuel and won’t restart, it will restart on reserve ?  When I turn it off and back onto fuel, it will start again.  If I take for a short run on fuel it will cut out again and only restart on reserve 😳. Any ideas what else I can check.  Many thanks

Share this post


Link to post
Share on other sites


Topic moved to Yamaha ATV forum and renamed to include atv and issue.

Share this post


Link to post
Share on other sites

I would guess that the petcock has water in there as well and could have started to corrode inside. I would drain the fuel out again and take the petcock apart and clean it out. Most likely going to clear it up.  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By JacobSlabach
      i know this isnt an atv but same type of thing.  I have a riding mower im fixing and selling for my aunt and it has a dead battery.  i jumped it off my atv and when i turn the key nothing at all happens.  i tried jumping the relay still nothing.  this is with the seat down.  you wouldnt think this mower would have issues as its a top-of-the-line brand and almost brand new (aunt found it for a good price, still got tits on tires, just sat for a couple months in a mechanic shop
    • By JacobSlabach
      got 7 atvs off CL recently for a good price.  one of which is a yamaha warrior.  anyone know where the vin is printed on this bike?  Haha good place to start as I do not know year or size yet.  The former owner says needs exhaust ans and clutch work.  he said it ran fine until the clutch cable broke and then I couldn't get the new cable adjusted right and it would grind gears.  things I see:  clutch cable locked up again, no brakes, carb leaking (green with algae around the bowl and has gelled gas stalagtights on it), aftermarket exhaust melted the airbox so I need something different and a new air box.  I would like the use the current exhaust if I can but I have a feeling its a redneck fix as it looks like there is an ace bandage holding it to the exhaust pipe (its an aftermarket slip-on exhaust), so I'm not sure about that- lets get the bike running first.  also, battery (looks brand new, what a shame) is dead, 0 volts.  Otherwise, bike looks to have not been wrecked, and plastics are ok (it sat outside under a 'tarp' for 3+ years since it was run last).  any tips and advise on where to start first would be awesome as this is my first clutched bike (manual).
      the clutch is my main concern- I've never rode a clutched bike so I dont even know what its supposed to feel like.  lol I'm spoiled on my automatic polaris 
    • By Derrick Lenz
      So I bought a brand new carb that was set and everything. Put it all together and it runs and idles good. The downside is the bottom of the bowl is leaking fuel not a small leak either. I bought one previous and it was a cheap one and it leaked as well so I figured I'd spend the money and by an OEM one and it still leaks. Should I send it into the mechanic and have them adjust the float? I mean for a new carb I was kinda disappointed. Any help would be great! Thanks in advance.
    • By Mudrecon
      Haven't got a service manual for this yet so I'm flying by the seat of my pants I made myself a shifter extension to go up by the gas tank took my foot shifter off to weld it and now when I put it back on I don't seem to be able to find neutral. Is there some asinine reason that you have to do something internally when you change or remove the foot shifter? It was a simple take off weld put back on and dog bite my pecker it's not working. I hope this is something simple I've done and that's something I need brain surgery for. Cheers fellas I know y'all will have the right answers
    • By JacobSlabach
      I have a gentleman that asked me to service his bayou for him.  I have always wondered what oil should be used in atv engines?  Pros?  Cons?  What weight should be used in what type of weather?  Is there one kind that I could bulk buy and safely used in any quad I worked on or owned?  What about performance?  Engine Life?  This has always been a 🤔🤔🤔 area for me with quads as far as why you would use one type of oil over another....
      Thanks!
  • Similar Tagged Content

    • By Matt3
      Recently, I changed the timing chain. I lined up all timing marks and set valve lash at TDC.  The mark on flywheel was on point as well when I looked through sight hole. I started the engine and starter turned it over then it hit and stuck. I did it one more time and the same thing happened. I took everything off and saw no damage. I tried to turn it over by hand and same thing. It turns halfway or so and hits. I loosened valve lash and took crank gear off and it does the same thing. It will turn over clockwise fully but not CCW. It seems like the crank sub assembly weight is hitting the gear balancer weight. I can turn crankshaft CCW while turning the gear balancer CW and get it to go but feel it hitting something. I also can spin crankshaft CCW without crank gear on and force the engine to break past the stick. It’s not the piston.
      Please give me some suggestions thanks
    • By BradF80
      Hello all,

       I registered on this site because I just purchased a new to me 2005 Yamaha Bruin 250 2wd. This seems to be the only place to get diagrams so I'm hoping I can download them sooner or later. The guy I bought it from said it had no spark. And it truly does not have spark...lol

      I haven't looked into much on it. Looks like he replaced the ignition switch and the stator. I'm thinking CDI box but I want to check the coil first.

      I look forward to helping others out on the electrical end of the world. I am an ASE certified automotive electrical technician. If it's 12v, I can usually figure it out.
    • By oxidized_black
      2005-2006 Yamaha 250YFM Bruin 2007-09 Yamaha BigBear 2WD
    • By oxidized_black
      2005 - 2006 Yamaha 250YFM Bruin/2007 - 09 Yamaha BigBear 2WD
      View File 2005-2006 Yamaha 250YFM Bruin 2007-09 Yamaha BigBear 2WD
      Submitter oxidized_black Submitted 12/14/2016 Category Yamaha ATV  
    • By michaelh6
      my 2004 yamaha bruin 350 4x4 has some kinda short in the wire harness or something the lights come on but very faint and then get brighter and some times not at all and sometimes works fine without a problem. all my connections are good. all my grounds are good that i can find. any ideas would help please
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...