Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

buddybeans

2001 warrior runs great in reverse but dies letting out clutch in 1st

Recommended Posts

Hope someone can help. It runs perfectly in reverse..but dies while letting out the clutch in first. i can take off a little in first and second but it'll die out. It has excellent power in reverse though? it's a 2000 warrior 350. it's impossible to shift into neutral while it's running. 

Share this post


Link to post
Share on other sites


Try hitting the gas while letting the clutch out slowly. Lol. Just kidding.

Does it rev in neutral?

And just about all quads are semi hard to get neutral. That s when you look up the shift star mod. Very simple to do. All you need us a dremel.

Sent from my SM-N920V using Tapatalk

Share this post


Link to post
Share on other sites

Is it possible the brake is dragging? Often a vehicle  (  quad or  car)  will have less brake resistance in reverse and be able to  move quite easy, but  lock up  in forward gears..  Can you roll the machine fairly easily when it is shut down and in neutral? If not , check for a frozen  brake .

 

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Forum Topics

    • 1997 Kawasaki Bayou 300 2x4 (klf300b) Runs Bad

      Hey I have a 97 bayou 300 2x4 (klf300b) that i bought for 1000 last June and sunk another 1000 into it already.  When i went to look at it, the seller had warmed it up before hand (he was riding it when I got there).  it ran good so i bought it and took it home that evening... next morning it wouldn't hardly start.  I discovered the carb was clogged, there was chunks of rust in the fuel valve, the choke lever was missing and other things.  I have since cleaned the carb and replaced the fuel valve and gas lines and cleaned out the gas tank and cap.   Enough background on it, the problem is this:  It floods if i push it past half throttle in 4th and 5th gear even going downhill and shifting correctly.  It also has to idle and warm up when you first start it which is really annoying now that its cold...  It also smokes blue smoke for about 15 seconds when started cold-  does not smoke at all once warm but the exhaust still smells like burnt metal.  A friend told me that it didn't have enough compression.  I also found out that the valves are a common cause for low compression on Kawasakis..  I have never adjusted valves before-  the most I've ever got into a engine was a head gasket on a riding mower so I'm new to this.  My goal is to get this bike running and starting cold like a top-  should i tear down and rebuild the top end?  What should i try first?  I tore the carb apart and rebuilt it and fiddled with the air screw and nothing changed.  I also ordered a compression test kit that should be coming in soon. Ive also considered just selling it for like $500 and taking the hit-  Id rather not sink too much more into this machine..  lol

      By slabach, in Kawasaki ATV Forum

        
      • 40 replies
      • 354 views
    • 97 Polaris sportsman 500 runs about 10 sec then dies

      Hello, Everyone first time here, I appreciate this opportunity, I have a 97 polaris sportsman 500 that I just acquired, been sitting awhile ,would not turn over with a new battery, replaced the starter, got it to turn over, but no fire, replaced the coil, cdi box, new spark plug, spark plug wire and boot, still no fire, So I changed out the stator, boom I have Fire, Carburetor was in bad shape ,so I installed a new carburetor, a new fuel pump and filter and all new hoses, and before I tried to start it I cleaned the fuel tank, well here we go, It started right up idled like a brand new one, Idled for about 10 seconds and died, fired right back up idled great and revved up great, but in 10 seconds it died, fired right back up, this time I held the throttle about half throttle, and it kept running, but when I let off it died, so I then adjusted the throttle cable from all the way tight to all the way loose, and vise versa, still the same thing, Please somebody help, cause I'm bout to give it the HAMMER TEST.   

      By Danny Gardner, in Polaris ATV Forum

      • 12 replies
      • 71 views
    • Honda 2013 420 reverse problem

      My 2013 Honda 420 occasionally won't go into reverse. I don't think it is in the transmission as it does not make a click or noise. I think it is in the lockout. Someone told me when I ride near the ocean the salt can get on something. Any ideas?

      By Keith Proudman, in Honda ATV Forum

        
      • 6 replies
      • 115 views
    • 2017 Polaris Sportsman 570 EPS CVT Clutch

      Hi Anyone else with a 2017 sportsman with EPS, experiencing hard lock up with the CVT clutches. As compared to my friends 2006 Polaris 500 HO they seem to be a lot smoother engagement. Any ideas or is this normal for this model.   

      By Steven E, in Polaris ATV Forum

        
      • 3 replies
      • 148 views
  • Recently Browsing   0 members

    No registered users viewing this page.


×