Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
By Adrian Ciotinga
The title pretty much explains it all. When using the starter I can hear it spinning but not engaging the engine. The wheels also do not engage with the wheels when the clutch is out. The motor has compression if that helps.
I am new to engine work and repair and I bought this quad with the idea of fixing it up (not knowing the full extent of the damage). The previous owner said it ran but sat for a year (I don’t believe that for a second after opening it up) and had bought a few new plugs and a starter motor, none of which fixed the issue.
Any help would be greatly appreciated!
I have attached a few pics of what I think could be wrong.
The thing sat since Christmas 2018 and while I decided whether to replace the starter (which I finally did today). I am not sure if I added fuel stabilizer or not but chances are good I did. I kept the one year-old battery well charged during the winter. It turns over well but won't start. I have a blue spark on a brand new plug. When I pour a bit of fuel down the cylinder, the engine starts and runs for a few seconds (once for as long as about 8 sections) and then dies. Even before adding fuel to the cylinder I noticed that the spark plug was wet with fuel.
The air filter looks a bit dirty so I removed it just to see if the engine would start better but it made no difference.
If the fuel did not contain stabilizer then the carb may be gummed up. I don't really want to remove the carb to do a thorough cleaning. Is there a product I can spray into the carb while the engine turns over that will clean the carb?
Any other suggestions?
By Resurgence Small Engine Inc.
Recently, Jonathan has been repairing & reassembling a client's 1983 Big Red Honda ATC200E. In this video, he gives an overview of how he approached diagnosing the ATC and creating a plan for the project.
Similar Tagged Content
I was riding my 400ex one day and when i shut it off to put it in the garage i tried to start it put again to drive it into the garge and it wouldnt start.I put a compression tester on it and its like 30 psi with out throttle and 0 psi WITH THROTTLE.
when i put my finger over the hole it fell likes its pulling my finger in more then its pushing it out
Has good spark.When i took it into the shop the said it had 1oz of oil in it and a tiny pit of metal shaving(TINY BIT LIKE 30 flakes)
When i try to pull start (push start/roll start) it made a not normal sound and wouldnt stay running.
If my bottom end is blow why would it still turn over fine,
Are my valves siezed or not working properly
or is my timing off causeing valves to not open in correct order with fire
PLEASE HELP all help is appreciated
Hello. I am a new member as of today. I had a quick question to ask. I recently was driving mt HONDA RANCHER 2004 GPSscape 400 and my display stopped working. I was driving the atv and all of a sudden the speedometer and the service lights went out. Also the lights stopped working. I am still able to shift gears, change from 2wd to 4wd, and can still select if I want EPS or Auto. I have checked my fuse box and have changed a few of them around. It did not change anything. I was wondering if anyone had any idea of what had happend. Thank you for your time- Trenton
By Coral Breding
I loosened the allen bolts on the carrier and when I went to put my driver in the alot to pull back and tighten the chain, I noticed the holes were facing the front of the bike. I tried to slide a driver in and tighten the chain but the thing would not budge. I nearly ripped the tip off the driver in the slot. Any suggestions?
I have brought an 84 TRX 200 back to life and unfortunately whomever dug into it first removed the two trim pieces that go around the gas tank. I was thinking someone on the site may have an old parts bike with these pieces lying around..... If so, drop me a message and we can make a deal. I just want to complete the bike!
Recently Browsing 0 members
No registered users viewing this page.