Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

MFD2012KQ

2012 king Quad EPS issue

Recommended Posts

I have a 2012 Suzuki king quad 750 with EPS

I do believe the power steering is not working, I have a plow on it and have to pull very hard on the bars to move the front tires when not moving!!

When Moving it is OK, have only been around a Polaris and sitting in the garage I could move the bars with my pinky finger only.  Not the case on my king quad.

Fuse is Good,  EPS light comes on when started but shuts off after few seconds, I believe this is normal

I have a black and a green wire coming out of bottom of the handlebars, under the headlight,  Not sure when theses are they are not hooked up to anything


Would love any insight on where to check or what to do Next

Matt

Share this post


Link to post
Share on other sites


Is your power steering pump working. Use a voltage meter to test if power is getting there. That's about all I got. I don't know your machine. Those 2 wires, are they bare or looks unplugged

Sent from my SM-N920V using Tapatalk

Is your power steering pump working. Use a voltage meter to test if power is getting there. That's about all I got. I don't know your machine. Those 2 wires, are they bare or looks unplugged

Sent from my SM-N920V using Tapatalk


Maybe a schematic would be useful

Sent from my SM-N920V using Tapatalk

Share this post


Link to post
Share on other sites

Those 2 wires, are unplugged, have connection ends on it,  Will have to tear plastic off 

My guess previous owner unplugged so EPS light would go off after starting

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Mike Hooper
      Hi everyone! I'm from New Zealand, and doing up a Suzuki Lt50 for the kids. This is the first bike I've ever worked on, and it's currently not running. Hoping that both Google and this forum will get me through! Haha

    • By Frank Angerano
      So i took a road trip today to look at a Suzuki Eiger! 2006 in perfect condition other then the fact it starts for 30 seconds and shuts down.  
      Its been sitting for about a year in a shed. 
      It has a plow and a winch included!!!
      Got it for a really good price and all looks good so far.  
       
      Stay tuned.  





    • By Julio Cano
      The tires which I bought on ebay cannot be balanced, it’s out of round.Tried riding and had wobble. 
      It was mounted in shop and they also put it on a rim they had sitting in the shop and same issue to confirm it.
      Are they defective ?
      They have brand new high quality tires for my  old suzuki gsxr750 and want about $600 for two tires.
      Is it worth it to pay that much or buy another set of front rear tires like Hexautoparts which has good reviews on trustpilot.com?
      Any recommendations ?
      Thank you.
    • By Michael France
      I have a Kawasaki Bayou 220 KLF220A and I cannot get it to start using the starter button. I have replaced the starter solenoid and the starter relay. I have followed the wiring diagram in the repair manual and it looks like the switch is working well, the neutral and reverse relay have power running through them and appear tp be working correctly. However, I can not find a wire runnng the the starter button that has power on it. Anybody have any idea what the break down is?
    • By StolenATV
      Taken from my car port around 0330 and was taken by at least 2 people found footprints pushing the quad all the way to the road (80 yards)
      The post 2012 Yamaha Grizzly 700 EFI 4×4 Stolen appeared first on STOLEN 911.
      View the full article
  • Similar Tagged Content

    • By turner_clint77
      Just have a couple questions 
      first does anyone else have an issue with the right hand tie rods coming loose 
      second does anyone else’s power steering making a weird sound at times 
    • By Jim Horst
      I have a 2016 sportsman 570 eps And have a vibration around 25mph, goes away around 30, then comes back around 45 to WOT. I've heard of the motor mounts being bad but have had it to the dealership and they say nothing appears to be worng. Anyone else have this issue and fixes please.
    • By Thomas Giles
      I have a 2017 Sportsman 570 SP with a power steering issue. Dealer tells me my machine is one that is not covered by recall and offers no help other than bring it in they will look at it. Any ideas?
    • By chuckufarlie
      I have a 2018 Kodiak 450 EPS that just this past Sunday I ran through a bit of water.
      After the puddle the belt was slipping, so I pulled over and drained the ultramatic housing and the slipping problem went away. This was all in L and everything seemed to work fine. Later when I got on a road, I put it in H, but it still rode like it was in low... i.e. I had to rev it up a lot just to get to 30mph.
      When at home I pulled the ultramatic cover off to inspect, and it looked okay in there. Not much dirt, belt and everything are clean, but when I rev up the engine (with cage in place, of course), the belt doesn't get to the top of the clutch (maxes out about an inch or 1.5" from top of clutch, so maybe it is normal).. I put it back together but same thing... H seems like L still.
      Do you think the clutch needs to be further dissected for cleaning, or could this be an issue with the gear selector?
       
    • By Dan Tressler
      I have a 2018 Sportsman 570 SP Hunters Edition. I bought the quad new in August of 2018 and put around 20 miles on it with no issues. In early January of this year the quad was acting as if it had a bad battery even though it had been plugged into a tender. I checked the battery and it tested well so I took it to the dealership for warranty service. They had it for almost a month. They determined the quad had a bad EPS unit and swapped it out. Then they told me that the wire for the EPS needed to be updated as they could not program the new unit with the old wire. After the wire came in dealership told me they were still having troubles programming. After another week and a half they told me that they had consulted several times with engineers from Polaris and found a workaround and that the quad was ready for pickup. I contacted Polaris to inquire about the warranty being extended as it was in the shop for a month. They extended the 6 month factory warranty for an additional 3 months. I picked the quad up and the dealership said that the 2018 SP editions were known to have issue a with the EPS units but believed that they had fixed mine. I had it back for around a month and took it out a couple times for short rides and everything seemed fine. I parked it again for a few days and when I went to start it same issues (acting like the battery is no good and won’t start, when I jump start no power steering). Took it back to dealership and waiting to hear what the diagnosis is this time as well as their plan to fix this permanently. Just wondering if anyone else has had issues similar to mine or can give me some advice. Thanks in advance!
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...