Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

I've got a suzuki 250 4×4. I've gone there it almost entirely and it idles fine but when I give it gas it bogs down never winding tight. All it doesn't have is a breather box would a breather box cause this problem

Share this post


Link to post
Share on other sites


There have been  some  members found that without the breather box and air filter their machine does go lean  and bog as you say yours does.. You could try restricting the  air a bit either with  the  choke or just  by partially blocking the intake with your hand and see it it will rev up  ok .

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Forum Topics

    • Just bought 1988 Suzuki LT250 4x4 Quadrunner

      Just got the above mentioned quadrunner. First one ever. Always been a small engine tinkerer but figured I'd need a little help on this one. 

      By DKW, in Suzuki ATV Forum

        
      • 6 replies
      • 76 views
    • 2005 Suzuki King Quad 700 - Fan Replacement

      The saga of the fan continues. The Pin attempt in the fan shaft failed.  I then moved on to trying to weld the fan hub to the fan shaft.  I took it for a run the weld broke.  Now it was truly F'ed.  To recap the dealer price, they want $400 + CND for a replacement fan assembly. I searched all sorts of after market places and no one carried one.  Ebay had some used ones but they were $120 USD + Conversion rate for something as old as what I have.  I went to Amazon and eventually settled on this.   amazon link   What I found... and was amazed... was that the fan mounted to the Suzuki fan assembly bracket.  I was prepared to manufacture my own mount conversions...  It also came with "Harpoon mounts" (nylon zip tie like things that go straight through the rad.   Anyways it mounted to the original bracket. It fit perfectly.  Cut the electrical plug off replaced it with the Suzuki... all good.  Let the quad heat up, thermo coupler kicked in the fan circuit, polarity was right... all was good....  Fan is under the circuit fuse rating.     so I finally have a solid fan solution.  $34 CND vs $400+ CND

      By LMI, in Suzuki ATV Forum

        
      • 2 replies
      • 109 views
    • ISO 1988 Suzuki Quadrunner 250 4X4 manual PDF

      Does anybody out there have a link to the PDF manual download for a 1988 Suzuki Quadrunner LTD 4 x 4? If not does anybody have this on digital file they could possibly email to me or guide me in any direction to where I don't have to buy it? Thank you very much everybody in advance! Have a great day!

      By Jon Emrich, in General ATV Discussion

      • 2 replies
      • 198 views
    • 2003 Kodiak 400 brake problem.

      As title says , my dad was given a 03 400. It didnt run. I got it running and got the front brakes working, new calipers and master cylinder.  The rear are drum and its my 1st time really messing with them. I replaced shoes , cam was all froze up so cam wouldnt rotate , i took it apart and cleaned it up good , my problem is,  how do i know where to line up the cam with the lever , there is no needle that shows shoe wear on this , its missing. Any pics or help appreciated. 

      By Bills03400, in Yamaha ATV Forum

      • 2 replies
      • 66 views
    • Rebuilding 2002 Suzuki Quad Master 50 2-stroke

      Hey everyone,been dealing with quads since I was a kid,now I have a son who loves my raptor 700 and had gotten him an electric power wheel quad but it didn’t cut it for him.so for his birthday “xmas eve” I picked up a used 2002 quadmaster 50 for 500 bucks. It started and moved but needed work.. got it home drove it for a few feet and it started bogging down and would shut off. so I stripped quad down to the frame cleaned it up as best I could without removing motor from frame. replaced top end new head piston rings etc cheap kit off eBay along with carb that will be here today.the filter that was on carb was degraded and soaked with gas. Also new cylinder doesn’t have vacuum line so how do I block that off without getting new petcock valve? tightened chain. guy said quad doesn’t take oil as it’s a closed case right then I knew the guy knew nothing about the machine. So I changed oil,was black and thick and just nasty like sludge. suspension in rear seems good but the fronts are very stiff,any way to adjust these or should I get a new set? also upon stripping everything down I noticed the exhaust restrictor was gone so without that do I need to update jets in new carb,old carb has original jets?? and also I’m new to cvt tranny so how would I know if it’s bad etc? sorry for all the questions just want to make this thing safe for my 5 year old knucklehead. added some photos of my current progress didn’t take any inbetween cleaning everything though    please any info will be appreciated. i haven’t rebuilt a quad since 1999 when I had my blaster and my buddies had other 2 strokes I was the mechanic with no knowledge but always seemed to get things right!! also if you notice the old head looked chipped and damaged and I’m wondering if those chips made it into motor how would I go about finding them?i would think by now they would be chewed up? I did not strain oil that I drained but might do that later when the kids are sleeping and I have time to check it without kiddo seeing!

      By Jhyman1984, in Suzuki ATV Forum

        
      • 1 reply
      • 52 views
  • Similar Tagged Content

    • By Chomp
      I' bought a suzuki from our local scrap yard I got it running yet when I give it gas it lugs down muffled both rear tires slant outward are that suppose to.  That act like bearings are bad I checked bearings and there goodbeari and there
       
      LT400fw
    • By davefrombc
      View File 1985-90 Suzuki LT230 / 250 service manual
      Service manual for the Suzuki  LT230 /  LT250 1985-90
      LT230GE
      LT-F230G
      LT230S
      LT250S

      Submitter davefrombc Submitted 07/12/2017 Category Suzuki ATV  
    • By davefrombc
      Service manual for the Suzuki  LT230 /  LT250 1985-90
      LT230GE
      LT-F230G
      LT230S
      LT250S

    • By Resurgence Small Engine Inc.
      This past spring, Jonathan worked on a 1991 QuadRunner 250 that came with the fuel pump removed. We didn't find good information about connecting it online, so we made a video.
      Below is the link to watch Jonathan describe the connections on the Suzuki fuel pump. This applies to both the Quadrunner and King Quad ATV models.
       
      Hope you find it informative!
      Resurgence Small Engine Inc.
    • By Resurgence Small Engine Inc.
      Used ATV parts available from Resurgence Small Engine Inc.
      All parts have been identified by manufacturer's part number, photographed, and listed on our website.
      Our used OEM parts are available for up to 60% off dealership prices. This way you can maintain your machine with well-made OEM parts at a more affordable price!
      Compatibility can be confusing, but we’ve simplified it for you. Browse our current parts inventory by type, make, year, & model or search by OEM part number.
      We make the logistics easy with our Free Shipping Promotion on US orders over $100!
      Visit our website to view our current inventory:
      https://resurgencesmallengine.com/parts/
      Parts are located at Resurgence Small Engine Inc. in Wasilla, AK. Free local pick-up is available and our website is configured for domestic US shipping. For international orders, please contact us.
      More parts & models to be listed continuously! As of August 2018, parts are available for the following ATV models:
      Parts are listed for many models, currently including:
      Kawasaki 2003 KFX400 Polaris 2010 Ranger 500 4x4 HO EFI Suzuki Quadrunner 250 LT4WD 250 LTF250 500 LTF500F King Quad 250 LTF4WDX 300 LTF4WDX 450 Quadmaster 500 LTA500F 4x4 Eiger 400 2x4 400 4x4 Ozark 250 LT250 Vinson 500 LTA50F Yamaha Banshee 350 Big Bear 350 Raptor 350 Warrior 350 Wolverine 350 More parts & models will be added continuously!
      Resurgence Small Engine Inc.
  • Recently Browsing   0 members

    No registered users viewing this page.


×