Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Ty Warner

RZR overheats!

Recommended Posts

Hi all. Hope to get some sound advice. I have a 2016 Polaris RZR 900S. Thing is a BEAST! However, last couple trail rides I have been on, it has had overheating issues after a couple hours. At first I thought it was mud in/around the radiator so I cleaned it spotless. Last time it occurred, I noticed the cooling fan kicking on around 206' but then cycling on and off while temps are steadily increasing. I expect the fan should stay running until the temp has returned to normal operating range. I have an extended warranty on it but if it is a quick and easy fix, I would rather fix it myself.

Thanks in advance!

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Arizona
      Went shopping on Saturday, picked up another Kawasaki Bayou 220 and a Yamaha Timber Wolf 250
      I really should sell some of these but they are a lot of fun to find, fix and ride
      Of course neither of them run but that's part of the fun!  Az



    • By Dra O
      posted a while back - it was running at one point - I have all the plastic shroud off - it's down to frame and engine now
      -fuel pump: when line from petcock is attached, no fuel comes out other side to carb; the line to the carb is open (can blow through it); I thought when I cranked engine that the pump would spit out fuel on other side but it does not; I removed fuel pump and opened it up - diaphragm looks good - but internal areas had lotsa calcification build up - I cleaned this out and dried it good - the clear plastic pieces (?diaphragms) aren't broken - the spring w/ steel ball on end moves freely; am putting it back on tomorrow; but can anyone answer about the pump? isn't it supposed to pump fuel through it... to other side... to carb? puzzling
      -along with fuel pump: I replaced petcock 3 weeks ago (gas tank had rusty fuel in bottom - cleaned it out prior to new petcock); when I turn petcock arrow NOT to on or reserve, fuel comes out of line; when I turn it to on or reserve, fuel doesn't come out; puzzling
      -I don't know what's on back of fuel pump - it's a valve that has a hose coming out of it - looks like it goes to engine/carb - I haven't traced this out yet - what is it?
      -can squirt gas on air filter and engine will run for 2-3 seconds then stop - fuel in top of carb (under diaphragm) does same
      -it likely needs carb rebuild - will get to this - but something isn't allowing fuel to get from fuel pump to carb
      -I THINK it has a mikuni model x carb - diaphragm is ID 26mm  OD 68mm - hard to find inexpensive diaphragm, I guess because it's a model x
      -last thing - I replaced solenoid due to old one clicking; I HAVE to be charging the battery or it won't start/turn over - battery just goes dead; but if charging, it'll turn over nicely; i'm guessing it's a bad battery
      -any help appreciated - I've never owned an ATV before - inherited this beast from grandparent in-law
    • By Mo Salem
      So my front hub broke, I’d like to put aftermarket on. Hard to find new oe ones. Please help. I’m new to all of this, I have some car knowledge and try to apply it
    • By Rich1028
      Hitting the Trail this  Morning.
      3 weeks in a row!
      The Wife and I are heading back out to Leota
      http://www.upnorthtrails.org/trails/leota-trail.html
      Why Leota you might ask,and not somewhere new?
      Cause there are lots of trails to ride,and my old ass has to get familiar with the trails so I do not take a wrong turn.
      ...and Yes I already took a few wrong turns...getting better tho.
       
      Have A Great and safe weekend everyone! 
    • By Trevor B
      Hello. I got this fourwheeler to fix for my buddy. It wasnt starting at all when I got it so I opened the valve cover up and checked the timing and the timing was way off. I set the timing bolted all back together and it started. It only stays running with very little throttle applied. There is a weird noise coming from the engine and it smells like its burning and also smokes from the headers. I posted a video idk how helpful it will be but I need some advice on the next step. I want to say it's the piston and rings, but I'm not too sure was also thinking something was up with the valves. Thought I would get some advice before trying anything. Thanks!
       
       
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...