Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
By fede hanssen
I have just got a 1995 Bayou 220 from my brother. It is in decent condition ant it has not been used much, yet it has been sitting idle for a long time (4+ years).
The plan is to overhaul it and move it to a location where it will be used 4-6 times a year, so, beyond having the battery charged, the idea is to have it ready and in good condition. It will be stored in a steltered place while waiting to be used.
My questions would be: 1. What things should I carry out as basic overhaul tasks / 2. What are the typical aches, things to watch out for in this model/year.
I definitely plan on changing all the fluids, filters, battery, cleaning the carb, etc. but any specific recommendation from your experience will be of great help.
thanks in advance!
Hello everyone, did a search and not successful. Purchased new 2017 Sportsman 570 sp and my power steering is not working. Seems to have a mind of it's own. Works then it doesn't. Dealer says there's not a fix. Thought it was just me and it being a brand new machine with 4 hours on it. Dealership said it's this model only ? Not sure what a person in this spot is suppose to do and wondering are your thoughts mite be. Thanks
Following on from the brief interlude in the "introducing myself" thread....
In a nutshell, I acquired a YFM250 Moto 4 (1991) for cheap recently with the previous owner citing "no spark, needs a new magneto coil and I don't have time to fix it"... anyway I am dubious that the magneto/generator is the issue and thinking more along the line of ignition coil as after a clean up of the magneto I was able to get a rather decent voltage reading off the magneto with pull start and resistence readings seem to check out that the magneto is all ok (all 3 x phases = 1.2 ohms and no run to ground)
None the less I ordered a new Ignition coil and Magneto/generator coil and am waiting for them to arrive.
In the mean time I cleaned up the current Magneto, popped in a new battery and sparkplug, checked out all the wiring harness, all seemed good except I came across the "neutral switch" wire was broken.
After wiring up a new neutral switch wire, the neutral light now comes on (small win) and the starter relay (attached to rectifier) now clicks. If I hit the starter switch on handle bar the starter motor spins and if I pull the cord starter I get a spark on pull....YAY!! I'll try and attach a video below if possible.
So onto the starter motor. Starter solenoid seems to work A-ok, even if it looks crappy and starter motor spins as it should when I hit the start switch....but here is my issue.
When the starter motor runs it turns Cog #1 and Cog #2 (see photo below)....but the chain in the back of the starter which I assume is the timing chain, does not move and there is no apparent movement of the piston in the cylinder.
If I turn it by hand (per photo) or with the pull starter however the chain moves and the engine turns. However cog #2 rotates but not fluidly with the "Crank" (part I turn by hand) for the lack of a better word to use if that makes sense?
Is there a grub screw or similar on Cog #2 that fixes it to the center shaft to make it all turn when the starter motor is run? Could there be a part missing? Previous owner had the starter apart so could be possible?
The outer/front part seems to be on a key-way so not sure how to remove this easily to check how Cog #2 is attached.
What am I missing here?
I'm really considering this utv. Before any negative comments about this machine remember I did everything I wanted with a 250 Ozark. My 09 rubicon was over kill. I'll use it for snow plowing bulldozing logging and cruising. So I can spend 8,500 on a ruby or the 500 pioneer.
By Dalton 3
Having trouble finding parts for my hisun 2012 HS500S/Rodeo 500. Have heard many comments about hisun just being a knock off of other manufacturers and that the Rodeo is a knock off of a Grizzly 500. Don’t know how true it is,but, if so will the Grizzly parts fit the Rodeo❓Currently am trying to find a rear suspension part which I believe is called a balance bar. Any thoughts or ideas❓
Recently Browsing 0 members
No registered users viewing this page.