Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
Similar Forum Topics
To start it off, I'd like to share the bakery display cases I made for my wife. I'm sure ya'll have some impressive stories behind those HF tools, let's see 'em!
I built these bakery display cases for wife on almost 100% HF tools a couple years ago. Only thing I bought from Home Depot was the wood/plywood/stains and 3 sawhorses for my workbench. Router, circsaw, blades for both, sander, sandpaper, gloves, the nails for the nailgun (gun borrowed from dad, have a 5# pancake for air) I had almost zero tools to start.
Some of their cheap "speed" clamps failed, but first time for me using those types of clamps, was expecting them to hold better:
heh my youngest helping my dad glue:
and for fun, here was the finished project (1 of 2, built 2 cases, this is the smaller .. the plastic was from Tap Plastics for the "sneeze guards" and the top case):
back side showing both cases:
By Rick Shropshire
Here's some pics from within the last month. Rather than build a frame and body from scratch, I drove to Kansas and bought a rust bucket G2 for $40 minus batteries. I've since cut it up in prep for the 1100cc v-twin shaft drive engine. I've included a picture of the of the latest mock-up. Im extending the frame and wheel base 12 more inches and widening the body by 12 more inches as well. I have on order a right side axle shaft and housing for the left side of my ATV rear end. This will widen the axle by about 12 inches. I will be eliminating the front a-arms and replacing with straight pipe from knuckle to knuckle. I'll post more as it progresses.
I keep some people's phone numbers in my phone just so I know not to answer when they call.
Complete Grizzly build
I built this Grizzly to preform at top ability in the mud! There is a few things that i am looking to change on the grizzly but well see!
Gorilla Silverbacks 28x10x12 Front, 28x12x12 Rear
( https://atvtirescanada.com/gorilla-silverback-tire.html )
( https://n2deepcustoms.com/ )
Rox Speed FX risers and bars
( https://bit.ly/2TsRv18 )
2r Racing tip
( https://amzn.to/2GgNdpE )
( http://2rracing.com/ )
White Secondary spring. 8 - 16g rollers, 1.5mm shim
( bought at local dealer )
Rad Relocation kit:
( http://www.rubberdowncustoms.ca/ )
12" Light bar
( https://amzn.to/2TrfZYy )
( https://amzn.to/2TpF9Xu )
Flush Mount LED headlight conversion:
( https://amzn.to/2D10Lm8 )
Yamaha front Bumper
( bought at dealer )
( https://amzn.to/2DQwmIR ) - guards
( https://amzn.to/2S2BCSq ) - mounts
3/4 inch spring spacers
Synthetic winch line
( https://amzn.to/2Gj1S3F )
ARCTIC CAT BRANDED SIDE-BY-SIDES AND ATVS ARE COMING BACK
Passion can change people. Change minds. And in the end, it can take us back to where our family has been all along. Because Arctic Cat fans and powersports enthusiasts demanded it, the Arctic Cat® name will be returning to ATVs and Side-by-Sides in 2019.
With a legacy of innovation, performance and fun, our legendary lineup of ATVs, side-by-sides and snowmobiles are built to take you anywhere you want to go — from carving up mountain snow on a Mountain Cat Alpha One in British Columbia, to flying over the dunes in Glamis in a Wildcat™ XX. And these high-performance vehicles are still made proudly in Thief River Falls, Minnesota.
Recently Browsing 0 members
No registered users viewing this page.