Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

orvilleortiz538

Timing marks 52FMH Coolster/Kandi 110cc

Recommended Posts

Can anyone help me out with the timing marks notches on engine casing 152FMH Coolster/Kandi 110cc here's a picture of the same casing I have0ea308b3896b9308c6d01488a7a73248.jpg

 

Sent from my SM-N950U1 using Tapatalk

 

 

Share this post


Link to post
Share on other sites


If you can't find marks,  pull the intake valve cover,  rotate engine counter clock wise until the valve moves then continue to rotate using something soft like a straw in the spark plug hole to tell you when the piston comes to tdc

Share this post


Link to post
Share on other sites

Does it have a rubber plug in the crankcase to align a timing mark?

Share this post


Link to post
Share on other sites
22 hours ago, Kartmanz W said:

Does it have a rubber plug in the crankcase to align a timing mark?

No,it does not,but I did just like Jeremy Morris says on his comment, Not with the straw but something similar,thanks for your help,very much appreciated. 

Share this post


Link to post
Share on other sites

Oh, so you got it sorted? Thats great, glad you managed to get it done.

  • Like 1

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Tahj
      I am looking to see why my 2005 Grizzly  660 won't crank. I have set the valves but suspect a loose timing chain.
      When working to remove the valve cover I found a "cap tensioner case" - parts #25  - #299 on Babbitts site.
      The  cover seems to bridge the valve cover and the cylinder head. What the hell is it and what surprises will I  find if I remove it?
      Uncharted territory for me.
    • By Tahj
      I bought a "project" Grizzly 660, I think it has been a few people's project. The PO had it for a while and did not have time to work on it. He said the battery was good, but I don't know how he knew because the display was blank, no lights and won't crank or run. 
      I found a nest under the front cover, by the CVT inlet, a chewed thru wire and a few more without insulation. Rewired those from the connector (black 3 wire to the display) and replaced the fuse as suggested by a search from this site. That got the display working and power to other circuits. 
      I replaced the aftermarket start switch with a used OEM switch from eBay. Then it would crank a little, and started once for a few seconds. 
      I'm a small engine mechanic - mowers, snow blowers, etc. In my small engine work I have had a number of rider mowers that would crank about a half turn and then stop. The owners have suspected a bad battery and changed it with no improvement. Setting the valves to spec usually fixed this.

      I set the valves on the Grizzly without solving the crank problem. I wonder if the timing chain could be off - slipped a tooth. 
      I don't know any way to check for this without pulling the head and looking at the timing marks on the cam gear. 
      Is there another way to check for proper timing?
       
    • By Andrew Klein
      Need some help please. I am trying to set timing on 4x4 350 bruin 2006. My brother and I disagree on which ones to use. If anyone has a picture they could share I would greatly appreciate it
    • By Daddybowman
      Hi, I am having the hardest time figuring out where and how to line up the flywheel for TDC on my sons 2019 Sportsman. The older models where much easier and the identification marks are self explanatory but this ones different and I can’t find a service manual. Any help would be awesome? 
    • By Christopher Middleton
      I was given a "Go-Kart" its an old Carter brothers dlx150 but the engine is not the same that came with this Kart. I am trying to ID it so i can look at getting some parts for it. the pictures attached are of the motor and the only ID marks on it. I am thinking its some sort of 200cc from the 1980's does anyone have a better Idea? I am really trying to get a rebuild kit for the carburetor. on the carburetor is  Keihin 63 AA YKT

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...