Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
So my parents have not let me get my license yet and I need to get around to gets parts and stuff. Answer: Yamaha CW50 scooter. This is a 2-cycle self-mixing scooter that so far, I am really surprised with the power output and speed. It reaches about 45mph since the speedo has been disconnected and has plenty of power for two riders. Its stupid looking, but with some work and a title and plate, it'll take me around town.. My issue is this: No key. I bought it for $150 from a friend and he bought it from someone for $100 who wired in a switch in place of the ignition. That guy got it form his neighbor who's renter left it behind. The scooter will run with this switch on or off (kill switch on handlebar kills engine) To get it tiled and a plate so its road worthy, I need to get the ignition working either by a replacement key or a new ignition. All wires are cut to the ignition and the switch turned on the power to the signal light switch. Also, the 2-cycle oil was leaking out the carb, through the air filter and onto the scooter. also, it runs great, but its making blue smoke with throttle and the muffler is wet with oil.
(I have new signal lights for it btw) So the issues I have with it summed up:
No key (need new ignition) smokes burnt out headlight- can I replace them with LEDs?
By james p
Hey all new member so I'm sorry if this isn't the correct place to post, but I'm having trouble with a 2000 polaris magnum 500 I just acquired. The quad ran when I got it but was having problems that sounded like the camshaft, and sure enough camshaft lobe was pretty much gone, so we replaced the camshaft and exhaust rockers and now the quad doesnt have spark. We had the quad running right before we tore the old camshaft out and now no spark. Anybody else ever have a problem similar? We've been checking for loose wires, checked grounds, and double checked timing but cant get it figured out so any advice would be appreciated! Thanks
By Cj Winds
I have a 2000 Polaris Xplorer with the 250 two stroke motor
It does not want to start with the electric start, the motor cranks fast, the battery is good, and there is good spark when cranking. The engine starts perfect when using the pull cord, it even starts if I pull the cord slowly and starts with one pull. The engine idles smoothly once started. My wife says she needs the electric start to work.
By Gary Ferguson
My old Big Bear nearly left me stranded but I managed to limp back to my garage just before it died. Now No Spark. I’ve changed the obvious, inexpensive and easy parts- spark plug & coil without any luck.
Ive stripped it down and traced all of the related wiring, checking as many connections as I can but no luck again.
Next I pulled the cover and accessed the stator housing to inspect and do some resistance testing to ID a possible short.
Here are my readings:
Source coil- 325 ohms
Pickup coil- 225
Can anyone tell me if these are good numbers, and if good, where to go next?
I assume my next purchase will either be a new stator or CDI, but since neither of these tend to be returnable items I want to be as sure as I can I’m gonna get a resolution to the problem!!
Gary in SC
By Scott Matthews
Just picked up a 1989 Big Bear 350 for $250 CAD. Bike was running but lost crank and spark. They've installed a new coil, a couple relays, and installed a Ford starter solenoid in place of the original. Now it cranks but has no spark so they sold it to me. Does anyone have a wiring diagram for this bike so I can test some wiring. Also any ideas as to direction to head would be nice. Lots of things have been hacked together so I know it probably wont be to easy. The ignition switch was replaced with a toggle switch, I already mentioned the Ford solenoid which 1 of the small wires was not re-installed, and a diode or something was removed from the oil temp sensor wire. I'm sure I will find more so a diagram would be amazing.
Recently Browsing 0 members
No registered users viewing this page.