Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

suitablesubstitute

Best place to buy 23x10x12 tires for old wolverine

Recommended Posts

Looking to get some tires for my old quad, but the tires are getting rarer.  Paying near 100 for tires seems a lot when that is what I just paid for tires for my car and i only ride four or five times a year :)

 

Anyone have any leads on good used or closeouts in 23x10/12 and 23x8/12?

 

Additionally, what other sizes can I run that might be easier to find and not muck with the 4x4?

 

Thanks,

 

AD

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Dwight Williams
      Ok, so I bought this scream of a deal the other day - a 94 King Quad 300 for $40.00.  It's been sitting outside with no carburetor on it for about a year.  Its rusty, missing some parts, wiring is all cut up and spliced etc.  No seat, no racks but the plastic is all there minus the headlight housing.  Anyway, who can pass up a $40.00 quad right?  I get it home and looked at the sight glass for oil level, it's about 1/2 oil and 1/2 water.  I drain it, refill it and turn the motor by hand (recoil starter is missing) and it turns over just fine.  I worked on the wiring for about an hour and got it to turn over with the electric starter and got enough of it sorted out to get a spark.  Did a quick compression test, 70 lbs.  Wet test bumped it up to 90.  Ok, so rings and cylinder washed out with water for a year, not too surprised.  I thought 'what the hell' and sprayed some starting fluid in it and it ran for about 2 seconds - enough to show  it's got life.  Since then the compression has gotten worse, I can't get enough pressure to activate the carb diaphragm, therefore no fuel pump either.  The compression is now around 60.
        Anyway, my question is....is it worth it to try to get this thing going?  I tore the top end down today and the cam and one of the rockers is pretty worn.  I figured a top end job would be about $100 or so, depending on the condition of the cylinder but I'll probably have to put a cam and rockers in it as well.  Doing some research on ebay I figure I'll have to spend about $500-$700 to make the whole machine right again.  Much less just to make it run and use as-is but I won't really like it until it's right.  I don't mind doing the work, I actually enjoy it but I'm concerned about what all that water did to the rest of the internals, I can't really test it all out until I can make it run.
      I know it's a basket case but I'm not into it much at all, even if I do the top end and find something else wrong I'm still not out much.  I'm leaning toward ordering the top end parts and going from there unless you can convince me otherwise - any way to check the rest of the internals without tearing it down?  I plan on flushing the oil cooler before I do another oil change, I've drained it twice now and it gets milky almost immediately just turning the starter - I suspect the oil cooler is polluted badly.
       
      I'll get some pictures today if anyone want to see them.
       
      thanks!
    • By bradley nelson
      Im cool with the police in my area so i can ride on public roads.
    • By Skhot K
      Hello! I picked up a YFM400 and I would love to talk shop with knowledgeable co-owners, and I'd love input about the machine from anyone here who clearly knows more than I do! Cheers from NY
    • By Mike8623
      OK guys, Ive got a 1996 suzuki king quad 300. Just where and how do you get to the CDI unit on these? Is there a way to check these if you dont have the suzuki tool or meter?
  • Similar Tagged Content

    • By marek porowski
      It’s kind of ATV related question as I need new trailer tires to tow my 4 wheeler. 
      Does anybody have any experience with loadstar 12” trailer tires ? 
      There is not to many choices for trailer tires here in Ontario and I was wandering if somebody can recommend me something. 
    • By Gilbey
      Does everyone run the tire pressure as stated on tires or perhaps a couple # below to soften the ride a little?
    • By Shawn Hurt
      I have a 2013 KQ I bought it new but rolled it a few years ago. I have replaced the left lower A-arm and left tie rod, the steering is still a little sketchy as I just eye balled the alignment. But the major issue is the left front tire cambers out at the top and has wore the tire bald. Tires have about 2000 miles on them but other 3 are half tread and left front is a slick.. I can not see anything else bent and don't know what to do..  
    • By Alan Callison
      OK ya'll.I need your help again.My ATV, 2004 Yam Kodiak 400 4x4,needs a new REAR rim or wheel what have you,whatever term you prefer. I've posted pics here as you can see.The tire is a 25x10.00x12 . As you can see its a deep REAR rim.I cannot seem to find a deep REAR rim. (Capitalization for emphasis) . The only sizes I can find listed are for both the front and rear wheels which is  12x7  4/110.  This doesn't help me much. So,who can help me out? Im getting desperate now!LOL!


    • By redneck999
      My village has now made golf carts and atv's legal on the street and now that the wife and i can go cruise around i'm considering putting on street tires to save my knobbies. Thinking on the route of saving costs and using car rims i'm sure i will have to get adapters but has anyone had experiences doing this? Down falls? We dont mud or anything and they would be used for summer only.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...