Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Gordon cousins

Gear Selector 1990 Yamaha Big Bear

Recommended Posts

Hi bought old Yamaha 1990 big bear  Guy took off  gear selector  and lost it anyone know were I con locate one  E103C201-5E99-4106-8E95-BEDEEFCB2C22.thumb.jpeg.38b5a5375f80b7cd282a4191e9bbc833.jpeg

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By JacobSlabach
      got a big bear I'm working on for a guy and it was flooding gas out into the air box, but still running.  I pulled the carb and its beat up just like his other bike I worked on for him (the bayou 220).  Its a weird carb tho:  the throttle comes in at two locations.  it has a plunger and a butterfly.  Is this necessary and could I just switch to a butterfly carb?  The problem with it is it has a broken float fork (the metal piece that holds the float pivot in place.  I'm assuming it is causing the flooding.  also the rest of the carb is well worn out and most of the screws are stripped telling me that it has been fiddled with too much by someone who didnt know what they were doing.  Also, the oil temp light is turns when key is turned and then goes off after a second- dont know if thats supposed to happen or not.
    • By deanpeddle
      hi folks - Today I installed a new starter for my 2001 big bear. 400  The old starter has been dead for several years but I'm just too old now to be yanking that pull cord any more.  
      Here's my issue:   When I pushed the start button the starter turned over ... and kept going - even after the start button was let go.  After 20 seconds or so the starter finally stopped .  I pushed the start again and the same thing happened ... In fact, it kept trying to start the machine even after I turned off the key!  (for about 10 seconds).  (I also noticed that the positive side of the battery got very hot to the touch.)
      Any ideas on what's happening?  thanks
    • By wrench66
      Hi all,
      I recently acquired an old Bayou from a neighbor that I cleaned up a got running, then from nowhere a problem crops up where it refuses to start........ I pull the plug and it has no spark, pulled the plug cap off and laid the bare wire on the exhaust header and still nothing......once in a while though when I push the starter button but as I let off the button it might spark once. Now it did begin sparking normally just once and I plugged everything back in and it ran normally again until I turned the engine off. Next time I tried starting it we were back to no spark or the one spark deal.
      I have tested the stator wires at 140 ohm, the pick up at 130 ohm (I can't seem to find a reliable number for these values online), I bought a new ignition coil and ignition switch on chance those may have been the problem but were not, not sure where to look from here......... does the starter relay switch have anything to do with the ignition on these? I know these older Bayou's are magneto type ignitions and do not need battery power to operate but I wonder if there are safety switches involved I may not be aware of. Also, can someone point me to a good wiring schematic for the magneto 220's? Pre 95 I believe.
      thanks for any help!
      -- Ray
    • By Allen Junior
      I have a1999 Yamaha bear tracker 250cc one day I started it with choke on and it idled for a min then clicked some and shut right off. I was using the pull start to start cause something wrong with starter but it won’t pull any at all now like it’s locked up  can someone tell me what the problem might be
    • By Jcolgin
      I have a 1998 Big bear 350...the tail pipe/spark arrestor is broke in the exhaust....how can I get it out to replace it? And what's the best way to get the new one in?
  • Similar Tagged Content

    • By Jcolgin
      I have a 1998 Big bear 350...the tail pipe/spark arrestor is broke in the exhaust....how can I get it out to replace it? And what's the best way to get the new one in?
    • By Ulf Löfstedt
      I just bought a Yamaha Big Bear 350 from 1992. The previous owner has run it on regular engine oil and I have problems with the clutch slipping. I think that's the reason.
      So what should I do?
      - Just change oil and it will be OK?
      - Clean engine/clutch + new oil?
      - Or do I need a new clutch?

      It is guessing the centrifugal clutch that slips. It has two clutches , it also has a "regular" clutch .
      Anyone who has any experience of using wrong type of oil?
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By Rcndn
      I have a 2002 yamaha bigbear 400 4x4 with a seized engine. I was able to free the piston with the old "fill cylinder with oil and let it soak" and it worked. So I bought a top cylinder rebuild kit , but now I have no idea the process to fix this . I need a service manual.... 
    • By Marie Keene
      I’m working on my dads 2002 Yamaha big bear 400 atv. He was having a hard time starting it for a while and then it quit running for good. It had no spark so u replaced spark plug and then cdi box. Didn’t help so tested stator which a part of it wasn’t working so replaced it. Nothing. I unplugged the rectifier cranked it and had a great spark. Got it in today cranked it and still won’t run but does still have spark. What’s going on? Any help is greatly appreciated 
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...