Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

basmn

07 trx400 oil drain bolt housing cracked

Recommended Posts

A friend has a 07 trx 400ex..the engine drain bolt housing has a couple of cracks where the drain bolt threads in and is leaking oil...a one had any luck sealing this area with JB weld or something similar ?

Share this post


Link to post
Share on other sites


We had a member that had this problem.  It’s a tough call working with this sort of thing.  

JB well does work but it’s not a permanent fix by any means.   There are secondary drain plugs you can install that get installed and they have another drain plug that’s within the new plug. Much smaller hole but it works.  You could install that and carefully thread it in with high heat silicone.  That should hold on for a while but you have to constantly check it.  

Second way to do it is have a good heli arc welder weld the cracks and maybe re tap it.  

Share this post


Link to post
Share on other sites

Thanks Frank...do you have a link to the secondary drain plugs please?

Share this post


Link to post
Share on other sites

Hey Bro I used these myself on spark plugs that got striped out and never had a problem so thing I go this route over the JB weld any time.I used it ti in crazy places always worked but if you lost the oil that work but the end if it.

Good luck hope it works for ever what route you choose buy heli coil is very safe and no real pressure on it either like a spark plug has 

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Venom
      Hi All,
      Hoping someone will be able to help.
      I have a 2006 Kawasaki Prairie 700 with twin Keihin Carbs CKVR D32. The Rear Carb is leaking out the side during cranking. it is not the float bowl overflow. It is on the opposite side of the carb from the diaphragm. 
      I got this bike not running and someone had already messed with it. I took the carbs apart , cleaned and rebuilt. Everything went pretty easy.  It looks like it could be missing a small tube between the carbs but I have all of them listed in the service manual installed. See the pic for where it is leaking from...
      Any help would be much appreciated.. Thanks.
       


    • By Eddie Lambert
      So I picked up a Cannibal that has been sitting for many years. I wonder if anyone can tell me where that vacuum port is on the engine. I’ve found the one to the air box, pressure regulator, and ecu but can’t seem to locate the one on the engine. Thanks in advance for any help. 

    • By RogueMX
      New to the site and I'm looking for some places to (LEGALLY) ride. I know a few places not too far from me but getting caught and over 1k in fines and criminal trespassing charges isn't on the top of my list. 
    • By bradleyheathhays
      I bought a 2011 Crown Vic with 300k miles 12 mos ago and I'm wondering how to approach servicing the timing belt. I know very little of it's past maintenance records other than what I've done with it this past year. Basically I'm wondering if I should go ahead and attempt to replace it now, or wait til something starts to go wrong. I don't know how timing belts typically go bad...if they just break or start to stretch or what. If this is an interference engine I'm imagining a fairly bad event so I'd like to get educated and be pro active about it.

      Second...Scotty Kilmer teaches that the worst wear an engine sees after changing the oil is before the oil gets pumped back into the filter and then into the engine components during the first engine restart. But he says if you disable the ignition spark somehow when cranking for the first time again, the lack of combustion in the cylinders helps with reducing this kind of wear quite a bit. I don't have an owner's manual and I'm not sure what fuse to pull to disable combustion ignition, or if removing a fuse would be the best way to do this. Any opinions on how this should be done?
    • By ezduzit
      picking up atv tomorrow, guys says motor is locked up. he thinks, anyway has been sitting for more than three years. Please understand i have not touched it yet but if his description is accurate im looking for suggestions on freeing it up before  having to tear it down. I'm hoping to get some great info from the pros on Quadcrazy.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...