Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

YamahaGrizzly

2016 Yamaha Grizzly 700 Blown Up Transmission

Recommended Posts

not sure where to post this but,

 

I have a 2016 yamaha grizzly 700 with a blown up transmission (again).

 

I was wondering if a 2015 Yamaha grizzly 700 Main drive transmission shaft and gears shift drum will fit on my 2016?

Share this post


Link to post
Share on other sites


Your best bet would be to look up the parts and compare the part number on any of the parts web sites. Best bet. @Ajmboy knows some of the parts places that list the parts by numbers   Maybe he can chime in and point you in the right direction. 

Also take a look (long shot) but look on eBay for that parts for both years and screen shot the patsy and compare  or down load the manuals here and compare parts  from the manual. It may take time but worth it. 

Lastly I would call a Yamaha dealer ask for the parts dept and ask them to run the part numbers for both years. I’m sure they would tell you  

 

  • Like 1

Share this post


Link to post
Share on other sites

Definitely cross reference all your needed parts on partzilla or rockymountainatv.  Both are great places to check part numbers.  eBay is a great place to get used parts. 

 

Share this post


Link to post
Share on other sites
8 hours ago, Roger-Ashley Freese said:

Definitely cross reference all your needed parts on partzilla or rockymountainatv.  Both are great places to check part numbers.  eBay is a great place to get used parts. 

 

Thanks, ended up getting a kodiak 700 parts motor for a stupid price! 

Share this post


Link to post
Share on other sites
Posted (edited)

They are interchangeable Yamaha uses same parts (although different p/n) for their 660 and 700 series one piston engines Glad to hear you've got them for a good price .That's a nice buy cause they're expensive, those are special heat treated steel parts .Congrats.

Edited by fbiondip

Share this post


Link to post
Share on other sites


Topic title edited to 2016 Yamaha Grizzly 700 Blown Up Transmission and moved to Yamaha ATV forum

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By YamahaBB350
      I have a Yamaha Big Bear 350 and the reverse doesn’t work, it shifts from low to high easily but it won’t go back to reverse. I’m new to this stuff, so I’ll take any help. Any ideas? 
    • By Brian Simmons
      I am looking at a 90cc Arctic cat 90cc not sure what year right off hand . The shaft broke off right outside the motor . Can anyone help me ? What do I need to do to fix it ? Do you have any pictures or videos ? Let me know ?
       
    • By mothrottle
      The VIN on my 2018 Kodiak 450 is not where it's supposed to be. I bought this used. Is there another "hidden" location where I can find it? Need the number for insurance co. Thanks in advance.
    • By Hondasher
      I picked up a 1997 Yamaha Big Bear 350 2X4 a week or so back in non running condition, apparently they said it needed a new carburetor or a battery, I cleaned the carburetor thoroughly and got it running on idle and without choke now and it shifts into all the gears even into reverse. Aside from making me bounce a little when trying to start out with a bit of throttle the shock suffice to say needs work. Anyways I made a video of it running and would like your opinions on it, as to how it sounds while running. It seems like it has a little whine I'm not sure why that is maybe someone can tell me what it is. Anyways here is the video.
       
    • By Randel1
      Hello, 
      I have a 2004 Yamaha Bear Tracker in the shop for repair. I have the service manual but it doesn't have all the information I need to fix the problem. I need to know the voltage output of the stator charge coil and pulse or trigger coil at cranking speed. The wiring diagram color code doesn't seem to match and that is compounded by the fact that the wiring harness CDI connector is missing so I have 7 wires that need to be connected to the CDI. I can not find a circuit diagram of the CDI which tells me where the pulse/trigger coil connects or the charge coil connects. The other 3 wires (black ground, orange ignition coil, and r/b ignition kill sw) also need to be connected. The CDI has a single 8 pin connector and has a P/N 4XE-00 F8T19871 -1122 number on it and I believe it to be OEM. However I think the Stator and pulse coil are aftermarket items. I have resistance tested everything and it all seems to be in spec. but I don't want to miss wire anything and cause damage. Any help would be greatly appreciated. 
  • Similar Tagged Content

    • By Ajmboy
      Here are my 2004 Yamaha Grizzly photo albums if anyone is interested in checking out. 😎
       
    • By Ajmboy
      Took the power washer and cleaner up the grizzly a bit.
    • By Sp33dy0000
      Hi can someone please give me some sort of idea I have a Yamaha 600 grizzly four-wheel-drive I have put a new coil and a new stater and Pulse stater on it with new plug and steel can’t get any fire
    • By Wayne Starz
      I have a 2005 Suzuki Vinson 500cc automatic 4X4. I can only shift it in to park & High gear, it will not go in low or reverse, what's the issue & the fix?
    • By David Cameron
      The small waterline insert for the hose that goes from the water pump cover to the thermostat housing has corroded off. I only need the insert on top and behind the thermostat housing that the hose goes over and can't find just the insert. It looks like it may be pressed in. I've have been told the entire motor housing needs to be replaced. The pic with the red line indicates where the hose and insert would be and the insert looks like the pic of the water pump  Any ideas would be really appreciated.
       
       



  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...