Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

I am currently looking to buy a 2" lift kit for my arctic cat and was wanting to know if anyone knows if it is worth the 100$? Also if does it really lift the quad 2" or does it just say it?

Share this post


Link to post
Share on other sites


I am currently looking to buy a 2" lift kit for my arctic cat and was wanting to know if anyone knows if it is worth the 100$? Also if does it really lift the quad 2" or does it just say it?
For the wear and tear on your on your quad, I personaly don't think its worth it.

Share this post


Link to post
Share on other sites
wat wear and tear does it do?
Puts way to much wear and tear on the entire drive train. Ball joints and cv joints to just name a couple things. Try to save you money down the road.

Share this post


Link to post
Share on other sites


Puts way to much wear and tear on the entire drive train. Ball joints and cv joints to just name a couple things. Try to save you money down the road.

I agree. Those things sit high as it is.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Dra O
      posted a while back - it was running at one point - I have all the plastic shroud off - it's down to frame and engine now
      -fuel pump: when line from petcock is attached, no fuel comes out other side to carb; the line to the carb is open (can blow through it); I thought when I cranked engine that the pump would spit out fuel on other side but it does not; I removed fuel pump and opened it up - diaphragm looks good - but internal areas had lotsa calcification build up - I cleaned this out and dried it good - the clear plastic pieces (?diaphragms) aren't broken - the spring w/ steel ball on end moves freely; am putting it back on tomorrow; but can anyone answer about the pump? isn't it supposed to pump fuel through it... to other side... to carb? puzzling
      -along with fuel pump: I replaced petcock 3 weeks ago (gas tank had rusty fuel in bottom - cleaned it out prior to new petcock); when I turn petcock arrow NOT to on or reserve, fuel comes out of line; when I turn it to on or reserve, fuel doesn't come out; puzzling
      -I don't know what's on back of fuel pump - it's a valve that has a hose coming out of it - looks like it goes to engine/carb - I haven't traced this out yet - what is it?
      -can squirt gas on air filter and engine will run for 2-3 seconds then stop - fuel in top of carb (under diaphragm) does same
      -it likely needs carb rebuild - will get to this - but something isn't allowing fuel to get from fuel pump to carb
      -I THINK it has a mikuni model x carb - diaphragm is ID 26mm  OD 68mm - hard to find inexpensive diaphragm, I guess because it's a model x
      -last thing - I replaced solenoid due to old one clicking; I HAVE to be charging the battery or it won't start/turn over - battery just goes dead; but if charging, it'll turn over nicely; i'm guessing it's a bad battery
      -any help appreciated - I've never owned an ATV before - inherited this beast from grandparent in-law
    • By Ed Zeppeli
      Hi,
      Oddly I'm having  a hard time ordering front brake shoes for my '98. 
      I'd appreciate recommendations on decent, widely available shoes if possible. Ideally available in Canada on short notice.
       
      Thanks much,
       
      Warren
    • By Rich1028
      Leota Quad Trails  on New to us  Machines 5-10-20
      We Just Picked up two Quads Friday,and we took them out riding,great machines!
      2008 Honda 400 Ex and a 2014 Honda 400 X

       
       
    • By hornythrony
      Hey I have a 07 king 700 there's lots of times that the quad will stall when the fan turns on also have to bump motor 2 or 3 times before starting to start it (makes fuel pump go on 2/3 times) anyone having or had this issue?
  • Similar Tagged Content

    • By tuke
      Hi. I recently had to replace the diaphragm on my QM 500, so I decided to add a sigma 6 jet kit. I basically replaces the main jet with a 135 (was 130) and moved the clip on the needle down one space (as per their directions) towards the RICH direction. Now that I have it reinstalled it starts great, idles great but if you try and give it any throttle it sputters, pops and looses all power. With the choke on it will accept throttle.
      This implies to me that I am running LEAN, which seems strange as I moved the needle towards rich and put a bigger jet in?
      I have checked the rubber connections on either side of the carb, the carb has been out and it is CLEAN.
      So any thoughts other then just "clean the carb".
      Thanks
      Chris
    • By hangingon
      I just order one for my ltz400. An after the fact ? anybody on QC used the kits before & if so did you like it & did it hold up?
    • By hangingon
      I got the Alba / Artrax clutch kit installed today! Its seems to work good on the short ride I took. Once I heal up from having surgery this past Monday Ill give it a good long test ride I cant wait!
    • By cdr42798
      Hey guys I just bought a new Honda es 250, and Ive been looking at buying a lift kit for it but Im unable to find one. Can anyone link me to one that fits the model. Or tell me if anyone can do a custom one.
      Thanks,
      cdr42798
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...