Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Shawn Hendershot

1985 suzuki quadrunner 250 Transmission Problem

Recommended Posts

Got myself another project. Got it running only to find it has a transmission problem. now I am trying to rebuild it but problem is the bolt that holds on the pull start recoil gear. Any ideas if this is left threaded or right threaded. Left loosy or righty tighty. 

Thanks.

Hender

Share this post


Link to post
Share on other sites


Look at the way it spins. If it's counter then it's left. Opposite if it spins right.

Sent from my SM-N920V using Tapatalk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By shar
      Picked up an LT80 (unknown year) for $200 recently for my girls. Not running at the moment, but does turn over. I’m thinking the carb needs to be rebuilt or replaced, as it appears to be leaking 2 stroke oil. Anyway, I’m excited to have something to wrench on in my (limited) spare time






    • By Gordon cousins
      I have a 1991 Big Bear 4x4   Shifter on top. Any one know if a  1994 Big Bear 4x4 Shifter on motor can be swapped 
    • By Adrian Ciotinga
      So I’ve had this quad for the better part of a month, and it’s been hard to start since the day I bought it. Once it warms up it idles just fine and has plenty of power and starts no problem, but cold it takes 20 seconds minimum of straight cranking to start it.
      It’s not really too big of an issue, I’m just curious as to why it takes so long. Earlier today, it took me about 2 minutes of on/off cranking to get it to fire.
      i have attached a video of a cold start to show you what I mean.
      FullSizeRender.mov
    • By Venom
      Hi All,
      I did a total restoration on a 2003 Yamaha Raptor 80. Rebuilt the engine and tranny.. Started it up today and it runs great. Took it for a ride and the transmission worked perfectly. Adjusted the carb a little more and went for another ride. It ran awesome, pulled into the workshop shifted into neutral ( Neutral light came on) and shut off the bike. went to roll it and noticed she would not roll. Turned on the key and neutral light was on... After some troubleshooting I found that she is in first gear with the neutral light on and will not shift into neutral... It seems to up shift fine into 2nd and 3rd and then back down to 1st. I am hoping somebody can shed some light on what is happening... Thanks for any help...

    • By dee004
      Hey all. Anyone have any ideas of fabricating an air snorkel for a 2005 TRX500FM and all venting extensions required as well? Thanks in advance Don
  • Similar Tagged Content

    • By bradleyheathhays
      Have an '02 Ford Taurus that's been grandma driven for all of it's 95k miles. After doing some very easy driving in town for a couple hours today I accelerated up to about 50 and noticed the car didn't seem to be responding to the gas pedal anymore. Looked down and the engine was doing 4k rpm so I let off the gas. Pumped the gas a couple times to see if the car responded and got nothing. Coasted to a stop in a safe lane and tested it in all the gears...nothing. The car stays put if you put it in park but you can roll it back when in any other gear position. The gear leaver on the tree does still give resistance when you move between gears. No music was playing and there was no noticeable sound whenever the breakage occurred.

      Called a friend and was advised to check the gear shift linkage at the top of the transmission. I'm not familiar with what the arm's full range of motion is supposed to be but I noted it's position while in park and low 1 and it seems to be moving well. Felt the connections and they seemed solid.

      Without the benefit of being able to do a proper run-up to a transmission fluid check I wiped and re-dipped the stick and it read fairly high although I hadn't added any fluid for at least 10k miles. The fluid was just a shade darker than light pink and although I didn't check specifically it didn't seem to have a burnt smell.

      There's no way low engine oil could cause something like this is there?

      Any ideas?
    • By Quadrunner44
      I have an older 1980s Suzuki quadrunner red lt 4wd (250)
      so just finished putting it all back together and was running fine just needed to adjust the rebuilt carb
      bf decides to hook up an air chuck to the gas tank because it got a shot of air in the gas line well 120psi didn’t agree with any of the parts including the new carb 
      end result : new battery new carb now it just clicks (one single click) won’t turn over 
      hard to pull start gets hung up (unless I remove the spark plug ) gas flooded out the first time but now does nothing purchases a new starter waiting the arrival 
      could there be damage to the crank shaft or pistons etc? Or install the new starter and try to fire it up ? What caused the starter to die after he flooded everything with gas was working fine. 
      Thank you 
    • By YamahaGrizzly
      not sure where to post this but,
       
      I have a 2016 yamaha grizzly 700 with a blown up transmission (again).
       
      I was wondering if a 2015 Yamaha grizzly 700 Main drive transmission shaft and gears shift drum will fit on my 2016?
    • By Kevin Nicoll
      Anyone familiar with these models? Its a new to me quad, picked it up for basically nothing... Just time and materials now, this looks expensive. 




    • By Wayne Starz
      I have a 2005 Suzuki Vinson 500cc automatic 4X4. I can only shift it in to park & High gear, it will not go in low or reverse, what's the issue & the fix?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...