Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Sonders

KVF300 Prairie service manual

Recommended Posts

So the more I read up on this the more curious I got. I found multiple wiring diagrams as well as looked up your carburetor.  The only thing I could not find is the proper color codes that match your bike. Are you sure of the year ? 

I found that the four wires going to your carburetor are for the heater (warmer) on the carb. It was added i would guess for colder states to avoid icing from moisture that’s on the intake side of the carburetor. 

 It looks to me that two of the four wires go to a temperature sensor that’s designed to tell the warmer to come on when needed or it comes on straight away and the sensor tells it to shut off when the engine reaches temperature, one or the other. 

The other two wires go to the warming element Inside the carburetor.

There should also be a small black box that is a controller/relay  for that warmer. It should be located someplace along the frame in that area of the carb? 

Ive attaches  a carburetor image that should match you bike for reference and posted a link to the carburetor parts. 

Hope this helps. 

 

https://www.partzilla.com/article//catalog/kawasaki/atv/2000/prairie/300/kvf300/b2/carburetor

 

C4B80EF2-4CEB-4083-AE59-C55049F56E02.thumb.jpeg.ccffffe2627a5ab4b575af607ddf2872.jpeg

 

 

Share this post


Link to post
Share on other sites


it's a 2000 model.  I wonder since it has an aftermarket carb with harness that the wire colors are different.  I'm still confused because I can't find the control module box for it anywhere.  The plug it was plugged into runs into the main wire harness and looks to me like it runs up to the battery compartment to plug into the CDI box.  I really don't want to cut the wrap off of the main wire harness just to trace that plug harness.  I wonder if that heater is even needed, or if it will run without it plugged in.  The aftermarket carb that is currently on it looks like what you have pictured above with that wiring harness and sensors.  The used oem one I'm getting doesn't have the harness on it, but it does have the brass sensor on the left in picture still on it.

Share this post


Link to post
Share on other sites

I would leave it alone.  Plug it all in and leave it be.  If it prevents the engine from firing then you will have to dig into it.  It I doubt that’s good to be the case.   When’s the new carb showing up ? 

Share this post


Link to post
Share on other sites

Hopefully oem one shows up tomorrow.  It is used so I’ll need to go through and clean it still.

Share this post


Link to post
Share on other sites


On 8/15/2019 at 8:07 AM, Sonders said:

It appears that the Service Manual thread at top of forum is dead as all the links no longer work.  I'm actually looking for service manual for a 2000 KVF300 Prairie that I just picked up.  Does anybody have link to one that they can share, or know where I can find one?  Thanks in advance for any help.

I just uploaded the repair manual you are wanting. It says it will need to be approved by admin so I dont know how long that takes

Share this post


Link to post
Share on other sites

For the cheap carbs you have to get the right size needle and seats and orfice for the engine you are putting it on.. the ones that come with the carb are wrong... it took me a long time to get mine to run decent with a China carb... I had to order all the right guts for it... in short new carb took more time and money to set up if you got a rebuild able oem one.

Share this post


Link to post
Share on other sites

Thanks for adding the manual Spartacus, I’ll keep an eye out for it.  I just got a used oem carb yesterday.  Once I get a chance to check it over I’ll put it on and see what happens.

  • Thanks 1

Share this post


Link to post
Share on other sites
1 hour ago, Spartacus Stroppel said:

I just uploaded the repair manual you are wanting. It says it will need to be approved by admin so I dont know how long that takes

 

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

@Spartacus Stroppel awesome job with helping out on that manual . I took a look and the manual is exactly what your machine @Sonders shows on the carburetor wiring. So it works the way I explained and should have the control box that I mentioned. You should have no problem identifying what’s what now. Let us know how that carburetor goes . 

 

14C20E0B-CD98-4042-95AF-0A507982968F.jpeg

Edited by Frank Angerano

Share this post


Link to post
Share on other sites


Thanks guys!  Now if I actually had some free time to work on the bike.  Hopefully I'll get a chance to look at it this coming weekend.

  • Like 1

Share this post


Link to post
Share on other sites

Always fighting the ⏰ never enough time! Story of my life, I finally got around to the Mojave I picked up almost a year ago. I have my two boys washing it down and getting it ready for a tear down.   Looks completely in tact, the original tool kit and paperwork was in the rear compartment! 

Hoping this thing only needs a carburetor cleaning and some fresh fuel and spark plug. 

Pulling all the stickers that are on it except for the factory ones since they are in great shape.   In a few weeks she will be like new, just not sure what the heck I’m going to do with it.   

38F59E7E-6AC5-44AC-B817-2C5440E52934.jpeg

0888B39D-46DB-43FE-A436-9EDCD029EE50.jpeg

2C9C315F-079D-4515-8B9D-8249BB4F0F6A.jpeg

090E7439-5A30-46B3-8EC9-F83769E510E1.jpeg

  • Like 1

Share this post


Link to post
Share on other sites

What to do with it?  I see two boys right there that could ride it.  Looks like a pretty nice bike.

Share this post


Link to post
Share on other sites

They have bikes already so we will see.  My son want to ride a quad with a clutch for a change so maybe he can have some fun for a little while. 

It’s all torn down already.  Antifreeze looks to be a good healthy green. I opened the bowl on the carb to see what’s going on, looks good but def a little varnish in there and stinks to high heaven of some nasty old fuel. 

Mu gut tells me pull the engine and properly clean and paint and put it back together but I’m going to sleep on that decision for now.  

It’s just more dirty then anything, I mean filthy!!!  Plastics are in perfect condition aside form the stickers all over it. 

Tomorrow the carb will get an overhaul and the rest of the bike will get a hot steam pressure wash and maybe that will make my mind up on pulling motor or not.   I ordered the paint today for touch up and a new chain and a clutch.  I don’t want to get into it to far so we will see.  Keep the forum posted but I will start a new topic for that later.   

 

 

44867D5D-F423-480B-B4DA-ACB5E7B586FA.jpeg

F548F3D0-C5F3-45C9-8A1B-C2FC5DC3C12D.jpeg

BFCCE723-D23C-45E6-A4D5-EE86E5F9A717.jpeg

67EBF2F2-D93A-423C-B3DF-39138AEBB147.jpeg

6ED0F55F-7571-43E6-A68B-11041165BB09.jpeg

D0B3EB63-26D8-4E91-B951-ECED9BE83AA2.jpeg

0F81BD73-6C07-42F4-B4C9-6769A92D7205.jpeg

FAC705F1-04B3-4931-B266-2846DE325D5A.jpeg

E7BBB31B-3150-4D99-9BAF-84BB93C2D969.jpeg

Share this post


Link to post
Share on other sites


13 hours ago, Spartacus Stroppel said:

If the manual worked for you please post up a review on it... I find it's hard to read write color in the schematics other then that seems complete... 

I was able to view the whole manual, so I'd say it's good.  Thanks again for posting it.  Do I need to go to the post where you actually uploaded it and review or is there another spot for reviews?

 

Still haven't gotten the used oem carb I bought the other week installed on the bike to see how it works.  I finally got a chance lastnight though to pull the carb apart and check it over.  It was all clean on the insde so hopefully good to go.  I'm going to try to get it installed one night this week or this coming weekend.  Wish me luck.

Share this post


Link to post
Share on other sites

Go to admins post for my up load click on it here... then scroll down till you find write a review... this will help tell others that the file is what it says it is and that it is complete.

Thank you

20190909_122614.jpg

20190909_122714.jpg

Share this post


Link to post
Share on other sites

ok just a quick update.  Was able to get the used oem carb installed last night.  Bike fired right up.  I let it run for a few minutes before shutting it off.  It has an oil leak I need to track down.  I went ahead and pulled the bike apart for a good cleaning and to go through the electrical connections to clean out and add new dielectric grease to the contacts.  I gave the frame and engine a good pressure washing last night.  So now I'll start going through electrical connections when I have time and go from there with starting to put the bike back together. 

Share this post


Link to post
Share on other sites

Sounds great, so the carb was in good shape then? 

Nothing better then washing it down   And having a clean frame to work on. 

Where about is the oil leak coming from ?  

Share this post


Link to post
Share on other sites


1 hour ago, Frank Angerano said:

Sounds great, so the carb was in good shape then? 

Nothing better then washing it down   And having a clean frame to work on. 

Where about is the oil leak coming from ?  

unfortunately not exactly sure where the oil leak is coming from.  I'm hoping that since the bike is clean now, I'll be able to pin point it.  I thought originally it was coming from the rear housing that the driveshaft runs through, but now it  looks like it's more coming from towards front of the bike, so I don't know.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...